ParaBody 400102 manual Tighten

Page 13

	16
TIGHTEN	7
	TIGHTEN
	11
TIGHTEN
	1/2	1	1/2	1/2	3	1/2
	0		1	2	3	4
FIGURE 17			10
FIGURE 17

STEP 17

Securely tighten all loose frame connections made to this point.

Tighten the:

•REAR UPRIGHT (16) to the BASE (10).

•FRONT UPRIGHT (11) to the BASE (10).

•TOP BOOM (7) to the REAR UPRIGHT (16).

•and the TOP BOOM (7) to the FRONT UPRIGHT (11).

13

Image 13

Contents Home GYM Bolt Length Ruler KEY Description QTY Parts ListStep 50 1/2 LOW Height X 3-3/4 42 1/2 X X 3-3/4 42 1/2 X LOW Height TAB Detail Ways Allow Spring PIN Assembly to Fully Engage StepLocknuts 38 3/8 X 2-3/4 Silicon or teflon spray available at most hard Ware stores Tighten 37 3/8 X Roller PAD 32 with rubbing alcohol or water. Also X 3 47 1/2 X 5-1/2 42 1/2 X 50 1/2 LOW HT Lowheight LOCKNUT50.NOTE NUT 48. Note Make sure LEG EXTAssemble one 3-1/2 Pulley 79 to the Floating Pulley Cable Guide Step Step Step 36 3/8 X 1-3/4 See Detail Cableadjustment Adjustment Lowerfloating Pulleybracket AdjustmentUpperfloatingpulleybracket Step