ParaBody 400102 manual Upperfloatingpulleybracket, Adjustment Lowerfloating Pulleybracket

Page 27

	UPPERFLOATINGPULLEYBRACKET
	ADJUSTMENT
ADJUSTMENT	LOWERFLOATING
	PULLEYBRACKET
ADJUSTMENT
FIGURE 40

STEP 40:

•Adjustments can be made in the above locations to set the correct amount of tension in the cables.

•For maximum performance, the HEAD PLATE should should just barely sit on the top WEIGHT PLATE and the UPPER FLOATING PULLEY BRACKET should firmly contact the end cap in the TOP BOOM, and the LOWER FLOATING PULLEY BRACKET should firmly contact the BASE.

	1/2		1/2		1/2		1/2		1/2			1/2
0		1		2		3		4		5		6

27

Image 27

Contents Home GYM Bolt Length Ruler KEY Description QTY Parts ListStep 50 1/2 LOW Height X 3-3/4 42 1/2 X X 3-3/4 42 1/2 X LOW Height TAB Detail Ways Allow Spring PIN Assembly to Fully Engage StepLocknuts 38 3/8 X 2-3/4 Silicon or teflon spray available at most hard Ware stores Tighten 37 3/8 X Roller PAD 32 with rubbing alcohol or water. Also X 3 47 1/2 X 5-1/2 42 1/2 X 50 1/2 LOW HT Lowheight LOCKNUT50.NOTE NUT 48. Note Make sure LEG EXTAssemble one 3-1/2 Pulley 79 to the Floating Pulley Cable Guide Step Step Step 36 3/8 X 1-3/4 See Detail Cableadjustment Adjustment Adjustment Lowerfloating PulleybracketUpperfloatingpulleybracket Step