Install Rear Stabilizer | Bowflex 001-7057 specification

Assembly (Unboxing)

Step 4 Install Rear Stabilizer

Parts:

• Rear Stabilizer (From Step 3)

Tools:

•5/16” Allen Wrench

•7/32” Allen Wrench

•3/4” Wrench or Adjustable Wrench

4-1Place the Rear Stabilizer in the bracket on the Main Frame with the wheels pointing away from the frame. Make sure the two bolt holes in the Rear Stabilizer are pointing downward.

4-2Install but do not tighten two 3/8”x3/4” Allen Bolts and 3/8” washers (Box 3 Hardware Card) in the underside of the Rear Stabilizer.

4-3Install two 1/2”x3 1/4” Allen Bolts with 1/2” washers and Nylock Nuts in the sides of the Rear Stabilizer.

4-4Completely tighten all of the hardware.

Threaded bolt holes

point downward

1/2” Washer

1/2” Nylock Nut

Main Frame

Rear Stabilizer

Wheels point

away from frame

1/2”x 3 1/4” Allen Bolt

1/2” Washer

3/8” Washer 3/8”x 3/4” Allen Bolt

Bracket

Hardware (1:1):

2 Button Head Cap Screw With Threadlock (3/8” X 3/4”)

2 Button Head Cap Screw (1/2” X 3 1/4”)

4 Washer (1/2”)	2 Nylock Nut (1/2”)	2 Washer (3/8”)