Bowflex 001-7057 manual Install Stabilizers and Lower Lat Connector, Hardware

Assembly (Unboxing)

13

Step 5 Install Stabilizers and Lower Lat Connector

Parts:

•Right and Left Stabilizer (Box 3)

•Lower Seat Connector (Box 4)

Tools:

•5/16” Allen Wrench

•3/4” Wrench or Adjustable Wrench

5-1Insert Lower Seat Connector into the Main Frame with the threaded hole on the flat side pointing down as shown.

5-2Align the Right and Left Stabilizers with the holes in the Main frame.

5-3Install but DO NOT TIGHTEN the hardware.

NOTE: You will install an additional screw in the Lower Seat Connector when the unit is upright.

1/2”x 1” Allen Bolt	Main Frame
	1/2” Washer

Left Stabilizer

1/2” x 4 1/2” Allen Bolt

Lower Seat Connector

Make sure threaded	1/2” Nylock Nut
hole is pointing down.

Hardware (1:1): Right Stabilizer

4 Button Head Cap Screw With Threadlock (1/2” X 1”)

1 Button Head Cap Screw (1/2” X 4 1/2 ”) 6 Washer (1/2”) 1 Nylock Nut (1/2”)