Bowflex 001-7057 manual Install Pre-Tension SpiraFlex Packs, Remove Cam Holders

Assembly

19

Step 14 Install Pre-Tension SpiraFlex® Packs.

	Pre-tension
Tools:	SpiraFlex®Pack
• 3/32” Allen Wrench (Box 1)	#8-32 X 3/8” Allen screw

Parts:

• Pre-tension SpiraFlex® Packs (Box 1)

Side view of pre-tension

SpiraFlex® pack

Hooks toward

main unit

14-1Align the rounded edge of the Pre-tension SpiraFlex® Pack with the rounded edge of the Tension Shaft and slide it all the way onto the shaft.

14-2When the Pack makes contact with the Cam, continue to apply pressure and twist the Pack to the left until you feel the Pack seat into place.

14-3Install and completely tighten hardware, installing screws in a star pattern around pre-tension pack.

Cam

Hardware (1:1): Hardware for this step located in Box 1

Step 15 Remove Cam Holders.

Tools:

• Phillips Head Screwdriver

12 Allen Bolt ( # 8-32 X 3/8”)

Remove Cam Holders

15-1Use a Phillips Head Screwdriver
to remove the Cam Holders.	Cam Holders
Note: The Cam Holders are only	Allen Bolt
needed when the Spiraflex®
packs are not installed and
may be discarded or recycled.