Bowflex 001-6961 manual Safety Precautions

Page 3

Safety Precautions

Always read and follow the Warning and Safety labels attached to your Bowflex Sport® home gym. Do not remove these labels. If you need replacement labels, please call a Nautilus Representative at (800) 605-3369.

Read the owner’s manual and follow it carefully before using the machine.

Parents and others in charge of children should be aware of their responsibility, because the natural play instinct and the fondness for experimenting of children can lead to situations and behavior for which the training equipment is not intended.

Never allow children to use the Bowflex Sport® home gym unsupervised. To do so could result in injury. If children are allowed to use the equipment, their mental and physical development should be taken into account. They should be controlled and instructed on the correct use of the equipment.

This equipment is under no circumstances suitable as a children’s toy.

Inspect your machine for any worn or loose components prior to use. Tighten or replace any worn or loose components prior to use. Pay close attention to cables, or belts and their connections.

Never use dumbbells or other weight equipment to incrementally increase the weight resistance. Use only the Power Rods® that came with your Bowflex Sport® home gym.

Set up and use your Bowflex Sport® home gym on a hard, level surface.

Do not wear any loose or dangling clothing or jewelry while using the Bowflex Sport® home gym. Stand clear of all moving components.

Before beginning any exercise program consult your physician or health care professional. Only he or she can determine the exercise program that is appropriate for your particular age and condition. If you experience any light-headedness, dizziness, or shortness of breath while exercising, stop the exercise and consult your physician.

This machine is meant for individual consumer use only, and is not meant for use by institutions.

Maximum user weight for the Bowflex Sport® home gym is 300 pounds (136 kg). For your safety, do not use or allow others to use the Bowflex Sport® home gym if they weigh in excess of 300 pounds (136 kg).

Allow a workout area of at least 8’4” x 6’6” (2.6 m x 2 m) of free space for safe operation of the Bowflex Sport® home gym.

Keep your body weight centered on the machine, seat, or base frame platform while exercising.

When using the Bowflex Sport® home gym for standing leg exercises, always grasp the Lat Bar on your machine for stability.

Keep out of the path of the Power Rods® when exercising and make certain that observers also stand clear of the Bowflex Sport® home gym when the Power Rods® are in use.

Never move or adjust the seat while sitting on it. Never stand on the seat.

When hooking up Power Rods® do not stand directly looking over the top of the rods. Stand off to the side while attaching rods.

Never attempt to exercise with more resistance than you are physically able to handle.

Keep cables and Power Rods® bound with the rod binding strap when not in use.

Before exercising, make sure the cable pulley system is properly secured, properly attached, and in perfect working condition.

All exercises in this manual are based on the calibrated resistance and capacity levels of the Bowflex Sport® home gym. Exercises not in this manual are not recommended by the manufacturer.

Never attempt to exercise while the seat rail is in the folded position.

1

Image 3
Contents Bowflex Sport Home Gym Assembly InstructionsTable of Contents Safety Precautions Home Gym Get to Know Your MachineBasic Assembly Principles Tools You Will Need Hardware GuideAssembly Guide Attach the Lower Lat Tower to the Base PlatformAttach the Base Legs to the Base Platform Completely tighten hardware installed during Step Attach the Squat Platform to the Main AssemblyInsert the screws through the lined up holes in the Chest Attach the Chest Bar with Pulleys to Main AssemblyAttach the Seat Bracket to the Seat Pad Button Head Screws Item #K one washer per screwAttach the Rear Leg to the Rear Leg Cross Tube Attach the Seat Rail to the Seat AssemblyDo not over-tighten hardware from Step Assembly can move freelyAttach the Rear Leg to the Seat Rail Rail Pull PinAttach the Seat Rail to the Main Assembly Rail Assembly can move freelyDo not over-tighten the hardware from Step 10a Attach the Leg Extension Pivot TubeHoles in the Leg Extension and cable end. Place 1 3/8 Attach Leg Cable to the Leg ExtensionSlide the hooked end of the Leg Cable beneath the Leg Thread the screw throughAssemble the Leg Extension Seat Attach the Leg Extension Seat to the Main Assembly Attach the Lat Cross Bar to the Upper Lat TowerPlace 2 3/8 Washers Item #N over the ends Attach the Upper Lat Tower to the Lower Attach the Rod Box with Power Rods to the Rod Box FrameAttach the Faceplate to the Main Assembly Attach the Rod Box Frame to the Lat TowerBe tightened during Step #A, as shown in , attaching one side at a time Attach the Faceplate Back PanelsTighten Lower Bolt on the Seat Bracket Them until the panels meet in the centerRepeat for remaining Chest Pulley Rod Cable Attach the Bench to the Seat AssemblyRoute the Rod Cables Locate the following itemsRepeat for remaining Squat Cable Route the Lat CablesRoute the Leg Cables Route the Squat CablesOffices in the United States International Offices Page Sport