Bowflex 001-6961 manual Sport

Page 24

SPORT

This manual is written and designed by industry professionals. If you have any questions regarding your Bowflex Sport® Home Gym or any instructions found in this manual, please call 1-800-605-3369 for assistance.

©2004 Nautilus Inc. All rights reserved. 1400 N.E. 136th Ave., Vancouver, WA 98684.

Bowflex, Bowflex Sport, Power Rod and the Bowflex and Nautilus logos are either registered trademarks or trademarks of Nautilus, Inc.

Image 24
Contents Assembly Instructions Bowflex Sport Home GymTable of Contents Safety Precautions Get to Know Your Machine Home GymBasic Assembly Principles Hardware Guide Tools You Will NeedAssembly Guide Attach the Lower Lat Tower to the Base PlatformAttach the Base Legs to the Base Platform Attach the Squat Platform to the Main Assembly Completely tighten hardware installed during StepAttach the Chest Bar with Pulleys to Main Assembly Attach the Seat Bracket to the Seat PadButton Head Screws Item #K one washer per screw Insert the screws through the lined up holes in the ChestAttach the Seat Rail to the Seat Assembly Attach the Rear Leg to the Rear Leg Cross TubeAssembly can move freely Attach the Rear Leg to the Seat RailRail Pull Pin Do not over-tighten hardware from StepAttach the Seat Rail to the Main Assembly Rail Assembly can move freelyDo not over-tighten the hardware from Step Attach the Leg Extension Pivot Tube 10aAttach Leg Cable to the Leg Extension Slide the hooked end of the Leg Cable beneath the LegThread the screw through Holes in the Leg Extension and cable end. Place 1 3/8Assemble the Leg Extension Seat Attach the Leg Extension Seat to the Main Assembly Attach the Lat Cross Bar to the Upper Lat TowerPlace 2 3/8 Washers Item #N over the ends Attach the Rod Box with Power Rods to the Rod Box Frame Attach the Upper Lat Tower to the LowerAttach the Faceplate to the Main Assembly Attach the Rod Box Frame to the Lat TowerBe tightened during Step Attach the Faceplate Back Panels Tighten Lower Bolt on the Seat BracketThem until the panels meet in the center #A, as shown in , attaching one side at a timeAttach the Bench to the Seat Assembly Route the Rod CablesLocate the following items Repeat for remaining Chest Pulley Rod CableRoute the Lat Cables Route the Leg CablesRoute the Squat Cables Repeat for remaining Squat CableOffices in the United States International Offices Page Sport