3.5.3. Autolap
With this function you can set the Suunto t6 to record lap times automatically by setting the lap distance. After the stopwatch is started, the Suunto t6 alerts and records lap times and other data after every completed lap. If Autolap
is active, number is displayed on the right hand side of the SPD/DST mode display. Refer to chapter 4 for more information on autolaps.
To set the autolap:
1.In the Speed and distance menu, scroll to Autolap and press ENTER.
2.Select On with UP/DOWN and press ENTER.
3.Set the lap distance with UP/DOWN and press
ENTER.
NOTE: Autolap can be set to alert in a range between 0.0 and 99.9.
NOTE: When a timer or Autolap is on, Suunto t6 stores information to the log accord- ing to the settings that were valid when you activated the stopwatch. If you adjust the settings after activating the stopwatch, Suunto t6 will still use the old settings. The new settings will only come to effect after you reset the stopwatch and start it again.
51