• Lowest altitude and corresponding log time
Information on split and lap times is displayed in the following order:
•Lap number, split time and lap time
•Heart rate and average heart rate
•Distance and speed (if paired and connected to a wireless speed and distance sensor)
•Current altitude and cumulative ascent and descent
To erase logbook information:
1.In the Training menu, scroll to Logbook and press ENTER.
2.Scroll to Erase with the UP/DOWN buttons and press ENTER.
3.Select the file to be erased and press ENTER.
4.Confirm file deletion by pressing ENTER again. Press ALT/BACK to return without accepting file deletion.
The content of a log depends on the Alti/Baro selection and what sensors have been connected to your Suunto t6 when you start the stopwatch. This allows you to record different combinations of information in the log.
The possibilities are:
•only lap times
•lap times and HR information
•lap times and altitude profile
•lap times, HR information and altitude profile
•with the optional wireless speed and distance sensor all of the above, and speed and distance information
NOTE: To check the available memory for your logbook, scroll to Logbook in the Training menu and press ENTER. The available memory capacity is displayed on the bottom row.
41