•Night Use: The light switches on when you press any of the buttons and stays on for 6 seconds after the last press of a button.
To change the light settings:
1.In the Time menu, scroll to General and press ENTER. 2.Scroll to Light and press ENTER. The current light setting is displayed in reversed color.
3.Select a suitable light setting with UP/DOWN and press
ENTER.
Sensor
With this function you can calibrate the air pressure sensor of your Suunto t6. Normally there is no need for this but if a certified reference barometer verifies that your Suunto t6 does not display correct values, you can adjust the offset with this function.
To change the sensor settings:
1.In the Time menu, scroll to General and press ENTER. 2.Scroll to Sensor and press ENTER. The current setting is displayed.
3.Change the sensor settings with UP/DOWN and press
ENTER.
NOTE: You can return the original calibration by selecting ‘DEFAULT’ as the sensor calibration value.
26