Suunto T6 manual Warm-up

Repeat for the second interval. The intervals are now set and you return to the Training menu.

NOTE: Interval 1 can be set to alert in a range between 0.05 and 59.59. For interval 2 the range is between 0.00 and 59.59.

NOTE: After the timer reaches zero for interval 1, your Suunto t6 automatically switches to interval 2 and starts the countdown of the interval. If interval 2 is set to zero, it goes back to countdown for interval 1.

NOTE: If interval timer rounds are set to “- -”, the timer will run continuously, as long as the stopwatch is running.

Warm-up

The warm-up timer starts after the Stopwatch has been activated. When the warm-up time ends, a signal beeps, lap information is recorded and the time interval starts, if

activated. If warm-up is active, number is displayed on the right hand side of the Training mode display.

To set the warm-up timer:

1.In the Training menu, scroll to Timers and press

ENTER.

2.Scroll to Warm-Upwith UP/DOWN and press ENTER.

3.Press UP/DOWN to select On and press ENTER.

4.Set the minutes with UP/DOWN and press ENTER. 5.Set the seconds with UP/DOWN and press ENTER.

NOTE: Warm-up can be set to alert in a range between 0.00 and 59.59.

44