In order to output the image (RGB image) from RCA Video output (yellow) when performing navigation, switching the image output is required.
1.Park your car in a safe place, and pull the side brake.
2.Turn the power of the main unit off (cut off the engine).
3.While pressing (AUDIO) button on the bottom left of the numeric keypad of the Remote Controller, turn the ACC on
(start the engine). Keep pressing the (AUDIO) button until the image is displayed on the screen.
Image output is switched, as the image of the navigation (RGB image) is output from RCA Video output, and the image is displayed on the screen.
Display with RCA input jacks
Voice Guidance Speaker with infrared sensor <
To Audio input | To Video input |
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
10