Installing the main unit
Installation notes
•Do not install the main unit in places where it may become subject to high temperatures or humidity, such as:
*Places close to a heater outlet.
*Places exposed to direct sunlight, such as on top of the dashboard or the rear shelf.
•Places that may be splashed by rain, for example close to the door.
•The installation strength will depend on the car model and the installation position. Choose a position where the main unit can be firmly installed, and install it securely. If the main unit is not securely fastened, the errors in location display will be greater.
•Do not install the main unit on the board covering the spare tire or other places which are subject to vibration.
•When the main unit is installed under a front seat, ensure that it does not obstruct the sliding action of the seat.
•Do not install the main unit anywhere that cargo or the like will get on it. Strong mechanical shock to the main unit would increase the errors in location display.
•Avoid installing the main unit in places where it will interfere with loading and unload- ing of the spare tire, jack, tools, etc.
•Check that a disc or a PC card can be ejected with the main unit installed.
•Install the main unit on a surface within +30 degrees to
than this would increase the errors in location display.
5°
5° | 30 |
|
15°
•Do not install the main unit vertically. Installing it this way can cause it to function improperly.
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
16