2Wire AVIC-9DVD installation manual Before installing the unit, To prevent damage, Parts supplied

Before installing the unit

•This unit is for cars with a 12-volt battery and negative grounding. Before installing it in a recreational car, truck, or bus, check the battery voltage.

• To avoid shorts in the electrical sys- tem, be sure to disconnect the (-) bat- tery cable before beginning installa- tion.

ENGLISH ESPAÑOL

To prevent damage

•When disconnecting a connector, pull the connector itself. Do not pull the lead, as you may pull it out of the con- nector.

•If this unit is installed in a car that does not have an ACC (accessory) position on the ignition switch, the red lead of the unit should be connected to a termi- nal coupled with ignition switch ON/OFF operations. If this is not done, the car battery may be drained when you are away from the car for several hours.

•To avoid short-circuiting, cover the disconnected lead with insulating tape.

		CC
	F	A	O
			N
O	F
					S
					T
				R	A
			T

ACC position

	F	O
		N
O	F
				S
				T
			R	A
		T

No ACC position

DEUTSCH FRANÇAIS

Parts supplied

Power cord Connector Connection box

ITALIANO NEDERLANDS

6