Selecting a User ID
USER
12
34
To start your exercise session using personal identification and preferences set up in Adding a User, take the following steps:
1.At the Precor banner, press the same USER key you designated in step 1, Adding a User.
Note: Refer to User Identification if you have not previously chosen a user ID key.
A welcome greeting scrolls across the display and the last program you used appears.
2.Press OK to select the program being displayed or choose another program using the navigational arrow keys or the PROGRAMS keypad. Refer to Selecting a Program for information about how to choose a program.
Important: If you make an entry error, press PAUSE/ RESET to return to the Precor banner.
3.Enter the safety code by pressing: 1, 2, 3, 4
An asterisk appears on the display with each entry.
4.Step on to the running belt with the speed at or below 1 mph or 1 kph and begin exercising. Use the SPEED arrow keys to increase or decrease the speed of the running belt.
Owner’s Manual: Workout Options | 34 |