Displaying the Serial Number
SERIAL NUMBER appears on the display followed by the
Note: If no serial number has been entered, then NO SERIAL NUMBER appears. Use the serial number found on a label on the rear cover (Diagram 1).
11.If you have not already done so, write the serial number onto the Warranty Registration card. You can also register online at www.precor.com.
12.When you are ready, press ENTER to return to the Precor banner.
User ID Entry with CSAFE Equipment
The C846i cycle is fully compatible with CSAFE protocols. When the unit is connected to a CSAFE master device and the user maintains a pedal speed above 20 revolutions per minute (RPM), the user is prompted for a user ID.
Note: If the optional power adapter is being used, then no pedaling is necessary for user ID entry.
The user ID is displayed as five zeros. The left most zero blinks indicating you starting point. The following table describes key functions while in CSAFE mode.
Keypad | Description |
|
|
PROGRAM CHANGE ▲ or ▼ | moves the blinking LED from |
| column to column |
|
|
RESISTANCE ▼ or ▲ | changes the number value in the in |
| the selected column |
|
|
Number keypad | use the number keys to enter a user |
| ID. The number that is pressed |
| appears in the display and the next |
| column begins to blink. When all |
| five numbers are in place, the user |
| must press ENTER to submit the |
| user ID. |
|
|
ENTER | submits the user ID. |
| Note: User ID entry is bypassed |
| when the user enter five zeros. No |
| workout statistics are recorded. |
|
|
RESET | resets the display to the Precor |
| banner. |
|
|
Product Owner’s Manual: Club Features | 17 |