Precor C846i owner manual Recumbent Cycles Realigning the Seat

2.Adjust the seat tilt (forward or backward) as shown in Diagram 10.

Diagram 10: Tilt the seat forward or backward

3.Wrench tighten the nut

4.Apply pressure to the seat and make sure that it does not move. Readjust and retighten the nut, if needed.

Recumbent Cycles: Realigning the Seat

If the seat rocks side-to-side, you need to realign the center wheel underneath the seat. Adjustment screws are located on the left side of the seat rail.

To remove seat wobble (side to side movement), take the following steps.

1. Obtain a ³⁄₁₆-inch and ⁵⁄₁₆-inch hex key.

Diagram 11: Loosen the two adjustment screws

2.Use the ³⁄₁₆-inch hex key to loosen the two adjustment screws as shown in Diagram 11.

Product Owner’s Manual: Maintenance 22