Precor 5.19, 5.17i, 5.21i manual Incline movement Unit Incline Setting Degree of Incline

CROSSRAMP ▲ ▼ (EFX5.17i and EFX5.21i):

Press and hold the CROSSRAMP arrows to increase or decrease the ramp incline from 1 to 14.

Changes to the ramp incline are not immediate. It takes time for the lift to reach the target incline shown on the display.

Table 2 shows the degree of incline for each

CrossRamp setting.

Column height

Incline Setting

13 to 14

11 to 12

9 to 10

7 to 8

5 to 6

4 to 5

1 to 2

Table 2. Incline movement

Unit	Incline Setting	Degree of Incline
EFX517i	1 through 14	12° through 25°
EFX521i	1 through 14	13° through 30°
EFX519	Stationary	Fixed at 20°

Important: Ramp changes occur only when the foot pedals are in motion. The number that appears on the display indicates the selected range, not the degree of incline. There is not a one-to-one relationship between the degree of incline and the CrossRamp setting.

The incline setting affects the column height in the program profile as shown in Diagram 7.

Diagram 7: Column height affected by changes in incline

Note: During the setup phase, pressing the CrossRamp arrow keys will not affect the ramp incline. However, the arrow keys do affect what appears on the display. Refer to Selecting a Program.

Owner’s Manual: Display Console 18