Viewing the Error Log
The error log appears. Up to ten error codes can be retrieved.
6.Press any arrow key to view the error codes. Each error code will be displayed along with the odometer and hour meter values at the time the error occurred. Refer to Diagram 11.
Most recent error | The hour meter at the time |
| the error was detected. |
1: ER33 AT | 12,345,678 STRIDES 1,714 HOURS |
Error code | Odometer reading at the |
| time the error occurred. |
Diagram 11: Error log
7.Copy the error code information to paper so you can provide it to Customer Support if needed. Be sure to copy it exactly as shown.
8.When you no longer need the information in the error log, press QUICKSTART while the error log is scrolling across the display. Maintain light pressure on the key until HOLD QUICKSTART TO CLEAR ERROR LOG scrolls past.
Prompts appear on the display to let you know when the error messages have been deleted.
Important: You cannot retrieve the error log once you have deleted it.
9.When you are ready, press SELECT or RESET to return to the Precor banner.
Troubleshooting Error Codes
If any error codes appear in the center display, turn the unit OFF and ON. If the error continues to occur, call an authorized service person for assistance. Refer to Obtaining Service.
Owner’s Manual: Advanced Programming and Troubleshooting | 36 |