HOW TO USE THE MANUAL MODE
1Insert the key into the console.
A moment after the key is inserted, the four displays, the LED track, and various indicators will light.
2Select the manual mode.
When the key is |
|
inserted, the manual | Indicator |
mode will be selected, | |
as shown by the |
|
manual indicator. If |
|
you have selected a |
|
workout program,
press the mode button repeatedly until the manual indicator lights.
3of the walking belt.
A moment after the START button is pressed, the walking belt will begin to move. Hold the handrails and carefully begin walking.
As you exercise, change the speed of the walking belt as desired by pressing the SPEED buttons. Each time one of the buttons is pressed, the speed will change by 0.1 mph. The buttons can be held down to change the speed setting quickly. Note: It may take a few seconds for the walking belt to reach the selected speed setting.
To stop the walking belt, press the STOP button. The TIME/INCLINE display will begin to flash. To restart the walking belt, press the START button
again. To stop the walking belt and reset the dis- plays, hold down the STOP button for two seconds.Press the START button and adjust the speed
4Adjust the incline of the treadmill as desired
To change the incline of the treadmill, press the INCLINE buttons. Each time one of the buttons is pressed, the incline will change by 0.5%. The but- tons can be held down to change the incline quickly. Note: It may take a few seconds for the treadmill to reach the selected incline setting.
5 | Follow your progress | with the LED track and |
the four displays. |
| |
|
|
The LED TrackÑ When the manual mode is selected, the LED matrix will display
a track. The track rep- resents a distance of 1/4 mile. As you exer-
cise, the indicators around the track will light one at a time until you have completed 1/4 mile. A new lap will then begin.
DISTANCE/LAPS
displayÑThis display shows the distance that the walking belt has moved and the number of
have completed. The display will alternate between one number and the other every seven seconds; the indicator will light when the number of laps is shown.
TIME/INCLINE displayÑThis display shows the elapsed time and the incline level of the treadmill. The
display will alternate
between one number and the other every seven seconds; the indicator will light when the incline is shown. Note: When a workout program is se- lected, the display will show the time remaining in the program.
SPEED/PACE displayÑThis display shows the speed of the walking belt and your current pace (pace is measured in minutes
per mile). Every seven seconds, the display will change from one number to the other; the indicator will light when your pace is shown.
Note: The console can
display distance, speed and pace in either miles
or kilometers. To see which unit of measure- ment is selected, hold
down the STOP button while inserting the key into the console. An ÒE,Ó for english miles, or an ÒM,Ó for metric kilometers, will appear in the CALS/FAT CALS/PULSE display. If you want to change the unit of measurement, press the SPEED ▲ button. Remove and then reinsert the key.
9