JVC RX-DV3RSL manual Basic DVD Player Operations, Open the Disc Tray, Load a Disc, Start Playback

Page 20

Basic DVD Player Operations

For details about DVD player operations, see pages 33 to 46.

You can also play back MP3 and JPEG files. See pages 47 to 50.

When using remote control, press DVD to change the remote control operation mode to the DVD player operation.

1 Open the Disc Tray

Before turning on the unit, turn on your TV and select the correct video input (see the manual supplied with your TV).

When you use a JVC’s TV, you can turn on your TV by pressing

STANDBY/ON TV on the remote control and select the

video input by pressing TV/VIDEO. (If your TV is not a JVC’s, see “Operating Other Manufacturers’ Equipment” on page 63.)

For changing the OSD messages—the information on the TV —into the desired language, see pages 51 and 53.

On the front panel ONLY

Press 0.

The unit is turned on and the disc tray opens.

The STANDBY lamp goes off and the illumination lamp lights up.

When a disc is already loaded, pressing 3 turns on the unit and starts playing back the loaded disc.

2 Load a Disc

Place a disc correctly with its label side up.

 

 

 

 

CENTER

 

 

CONTROLPE/C

DR

 

 

DVD/CD

TA

RCE

E

 

 

 

NAM

 

CINEMA

TV

SOU

 

 

 

 

 

 

 

HOME

VCR

 

 

 

 

RX

-DV3

STB

 

DVD

CORRECT

 

D

STANDBY

MODE

SURROUN

 

ON/OFF

STAN

INPUT

ANALOG/DIGITAL

N

 

DBY/O

 

 

ATT.

 

INPUT

By pressing the following buttons, you can pause, advance, or reverse playback, and locate the beginning of the title, chapter, or track.

On the front panel

REW/( TUNING 9/FF

From the remote control

FM MODE STROBE

– TV/STB CH +

To stop playback temporarily

Press 8.

• Pressing 3 starts playback again.

To move back the playback position by 10 seconds (for DVD VIDEO only)

Press 3 during DVD VIDEO playback.

The unit moves the playback position about 10 seconds before the current position, then resumes playback.

To advance or reverse playback rapidly

Press and hold ¢ or 4.

While you are pressing and holding ¢ (or 4), the unit advances (or reverses: for DVD VIDEO and audio CD) playback 5 times as fast as the normal speed. When you press and hold ¢ (or 4) further, the playback speed changes up to 20 times as fast as the normal speed.

• Releasing the button resumes the normal playback.

To locate the beginning of the chapter or track

Press ¢ or 4.

Press ¢ (or 4) to locate the beginning of the next (current or previous) chapter or track.

To locate the chapter or track using the number buttons

Press the number buttons (1–10, +10) to select the number of the desired chapter or track.

Ex. : To select 3, press 3.

EFFECT

CENTER

 

1

2

3

To select 11, press +10, then 1.

TEST

REAR·L

 

To select 20, press +10, then 10.

4

5

6

 

 

 

 

SURR ON/OFF

REAR·R

 

 

7

8

9

From the remote control ONLY

SURR MODE SUBWOOFER +

10/0

+10

 

 

 

 

 

100+

 

INCORRECT

3 Start Playback

TUNING

On the front panel

From the remote control

Press 3.

The disc tray closes and the unit starts playing back the loaded disc.

You can also close the disc tray by pressing 0 on the front panel.

About indication on the display while playing back a disc

While you are playing back a disc, the playback information appears on the display as follows:

Ex. : When DVD VIDEO is loaded

 

DIGITAL AUTO

 

 

 

 

 

 

AUTO SURROUND

SPK.

 

 

 

 

DIGITAL L C

R

 

VOLUME

 

 

 

 

 

 

SUBWFR LFE

 

 

 

 

 

LS

RS

 

 

 

 

 

 

 

 

 

Chapter number

Elapsed playing time

Ex. : When audio CD is loaded

 

 

 

 

 

 

 

 

 

DIGITAL AUTO

PRO LOGIC

 

 

 

 

L

R

SPK.

 

VOLUME

 

 

 

 

 

 

 

 

 

 

 

 

SUBWFR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Track number

Elapsed playing time

15

Image 20
Contents RX-DV3RSL If in DOUBT-CONSULT a Competent Electrician RX-DV3RSL Important for Laser Products Above ALL Table of Contents Adjust button 27 Parts IdentificationFront Panel DisplayRemote Control Parts IdentificationGetting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Connecting the FM and AM Antennas Getting StartedAM antenna connection FM antenna connectionConnecting the Speakers Connecting the subwoofer speakerConnecting the front, center, and rear speakers Speaker Layout DiagramConnecting Audio/Video Components About connecting cables/cordsFor Scart connections For audio connectionsCassette deck/CD recorder connection Digital connectionScart connection VCR STB AudioVideo RGB Audio OUTVCR STB Set Top BoxFor TV and video format For T-V LinkTurn On the Power Adjust the VolumeBasic Operations Select the Source to PlayTurning Off the Power with the Sleep Timer Turning Off the Sounds TemporarilyChanging the Display Brightness Activating TV DirectInput mode On the remote controlWhen DVD is selected as the source, you can also Basic OperationsAttenuating the Input Signal Activating the Recording ModeInput ATT indicator Changing the Source NameBasic DVD Player Operations Open the Disc TrayLoad a Disc Start PlaybackSelect Surround Mode Stop Playback Turn Off the Power into StandbyActivate Realistic Sound Field Press Surround ON/OFFTuning into Stations Manually Using Preset Tuning Tuner OperationsSelecting the FM Reception Mode Using the RDS Radio Data System To Receive FM Stations What information can RDS signals provide?Tuner Operations Operation ButtonsSearching for a Program By PTY Codes Switching to Broadcast Program Your Choice Temporarily CaseNews AffairsInfo SportOperation Buttons Basic SettingsOperating Procedure ¶ For subwoofer YESBasic Settings Set the appropriate digital terminal settingDigital input Digital in terminals-DGT Low frequency effect attenuator-LFEAuto surround-AUTO SR Auto mode-MODEOn the display Manual Select the source manuallySound Adjustments Press AdjustPress Control 3 or 2 to adjust Front speaker balance Adjustment itemsAdjusting sound from the remote control Front speaker output balance -BAL balanceTone-BASS and Treble DAP effect level-EFFECTCreating Realistic Sound Fields Dolby SurroundDTS Digital Surround DAP Digital Acoustic Processor modesPossible × Impossible All Channel StereoReflections from behind Early reflections Direct sounds Selecting Surround Modes Activating Surround ModeCreating Realistic Sound Fields Adjusting Surround Mode Using Remote Control Adjust the soundAdjust the speaker output levels as follows For using test toneDVD Player Operations Disc InformationPlayable Disc Types Discs you can play Disc TypeMenu-driven playback Disc structurePlayback Control function PBC Using the On-screen Bar Contents of the on-screen bar with the pull-down menuDVD Player Operations Press on ScreenBasic Operation through the On-screen Bar Press on Screen twicePress Enter Changing the Time IndicationLocating a Desired Scene from Disc Menu Press TOP Menu or MenuFrom the DVD menu From the VCD/SVCD menu with PBCSelecting a View Angle-ANGLE Press AnglePress Angle repeatedly to select the desired view angle Press and hold Angle for a few secondsChanging the Languages-SUBTITLE Press SubtitlePress Audio Press Audio repeatedly to select the desired audio languagePress Audio repeatedly to select the desired audio channel Selecting the audio channelFor VCD For SvcdPlaying from a Specified Position on a Disc Use the number buttons 0-9 to enter the timeLocating a desired chapter-Chapter Search Locating a desired position-Time SearchLocating a desired scene-DIGEST Press DigestPress cursor 5/∞/3/2 to move to the desired scene Special Picture Playback Press cursor 3 or 2 repeatedly to select VFP mode Repeat steps 2 to 4 to adjust other parametersChanging the VFP setting-VFP To adjust the appearance of the pictureProgram Playback and Random Playback Repeat to program the next stepsPlaying back in the desired order Playing back tracks in random orderRepeating a desired part Repeat PlaybackRepeating a current title, chapter, or all tracks Load an MP3 disc, then press MP3 Disc PlaybackBasic Operations Operations through the MP3 Control Screen Press RepeatLoad a Jpeg disc, then press Jpeg Disc PlaybackSlide-show Playback Operations through the Jpeg Control Screen Press Menu orOperation Buttons Configuration of Choice Menu Choice Menu OperationsPress Enter to finish the setting Press ChoicePress cursor ∞ or 5 repeatedly To move to on Screen Press cursor ∞ or 5 repeatedly to select the desired optionChoice Menu Operations Language menuPicture menu AutoAudio menu MP3Jpeg MAXSPK. Setting menu Rear SpeakerSubwoofer ReturnOthers menu Select this to deactivate itSetting Parental Lock Restricting Playback by Parental LockReleasing Parental Lock temporarily Changing the setting of Parental LockNew setting is stored Country/Area codes list for Parental Lock Glossary for DVD Player Operating JVC’s Audio/Video Components Operating Audio ComponentsSound control section Amplifier CD recorderREW Operating Video ComponentsTV Return Changing the Preset Signal Codes Operating Other Manufacturers’ EquipmentRelease STANDBY/ON TV Try to operate your TV by pressingEnter manufacturer’s code using Number buttons 1-9Release STANDBY/ON STB Try to operate your STB by pressingOperating Other Manufacturers’ Equipment Enter the manufacturer’s codeRelease STANDBY/ON VCR Try to operate your VCR by pressingMaintenance Cleaning DiscsCleaning the Unit General NotesTroubleshooting GenaralFor DVD Player Troubleshooting For TunerFor MP3 For JpegSpecifications AmplifierFM tuner IHF AM tuner0602NHMMDWJEM