JVC RX-DV3RSL manual Auto surround-AUTO SR, Auto mode-MODE, On the display

7Auto surround—“AUTO SR”

DIGITAL AUTO

AUTO SURROUND

L	R	SPK.
		VOLUME

7Auto mode—“MODE”

DIGITAL AUTO
L	R	SPK.
		VOLUME

Surround mode is automatically activated when the digital multichannel source such as Dolby Digital or DTS Digital Surround software or 2-channel matrix source such as Dolby Surround is played back.

You can enjoy Surround mode simply by selecting the source (with digital input selected for that source)—Auto Surround.

Select one of the following settings:

ON	: The AUTO SURROUND indicator always lights up
	on the display.

•If multichannel signals come in, an appropriate Surround mode will be turned on.

•If Dolby Digital 2-channel or DTS 2-channel including surround signals come in, “PL II MOVIE” will be selected.

•If Dolby Digital 2-channel or DTS 2-channel signals without surround signals come in, “STEREO” will be selected.

•If the other signals come in, nothing will change.

OFF : Select this to deactivate Auto Surround.

Notes:

•“ON” is the initial setting. If you have already changed the setting, “OFF” will be shown.

•This function does not take effect in the following cases:

–While playing an analog source.

–While selecting “DGTL D.D.” or “DGTL DTS” as the fixed digital input mode (see page 13).

•If you press SURROUND ON/OFF (SURR ON/OFF on the remote control) with Auto Surround activated, Auto Surround will be canceled temporarily for the currently selected source. Auto Surround setting will be restored in the following cases:

–When you turn off and on the unit,

–When you change the source,

–When you change the analog/digital input, and

–When you reset “AUTO SR” to “ON” again.

You can turn on this unit and select the source automatically by turning on the video components connected to this unit

—Auto mode.

•This function takes effect only when the video components and TV are connected to this unit with SCART cables.

•This function takes effect for the following sources—DVD, STB, and VCR.

Select one of the following settings:

AUTO1 : When a video component is turned on while the unit is on, the unit selects the video component as the source automatically.

AUTO2 : • When a video component is turned on

–while the unit is off, the unit changes the mode into TV Direct and selects the video component as the source automatically.

–while the unit is on or TV Direct is activated, the unit selects the video component as the source automatically.

•When a video component is turned off

–while TV Direct is activated or the unit is on with one of the video components selected as the source, the unit selects the previously selected video component as the source automatically.

MANUAL : Select the source manually.

Notes:

•“MANUAL” is the initial setting. If you have already changed the setting, other settings will be shown.

•When selecting VCR as the source, “AUTO1” or “AUTO2” may not work if you only turn on the VCR. If it happens, you may need to start playback to activate Auto mode.

26