JVC RX-DV3RSL manual Press Digest, Press cursor 5/∞/3/2 to move to the desired scene

Page 47

To turn off the on-screen bar

Press ON SCREEN.

Notes:

The 10/0 button works only as “0” in this function.

The +10 button is not used in this function.

You can specify the time in hours/minutes/seconds for DVD VIDEO, and in minutes/seconds for VCD/SVCD/CD.

7Locating a desired scene—DIGEST

The unit can display the opening scenes of each title or chapter on a DVD VIDEO or each track of a VCD/SVCD.

You can select a desired title, chapter, or track from the opening scenes shown on the TV screen.

MUTING

TV VOL

VOLUME

 

ZOOM

 

 

 

DIGEST TOP MENU TA/NEWS/INFO

MENU

 

CHOICE ( PTY

PTY SEARCH

PTY9

& For DVD VIDEO:

 

ENTER

 

While stopped or during

 

 

 

ON SCREEN

 

RETURN

playback

DISPLAY

For VCD/SVCD:

 

While stopped or during

 

playback without PBC

1Press DIGEST.

Up to 9 opening scenes are displayed.

Selected scene

While DVD VIDEO is stopped :

The opening scenes of each title appear on the TV screen.

During DVD VIDEO playback :

The opening scenes of each chapter in the current title appear on the TV screen.

When VCD or SVCD is loaded :

The opening scenes of each track appear on the TV screen.

2Press cursor 5//3/2 to move to the desired scene.

If there are more than 9 scenes, the digest screen will have more than one page.

To show other pages of the digest screen

To display the previous page, select the left top scene, then press cursor 2.

To display the next page, select the right bottom scene, then press cursor 3.

OR

Press ¢ to display the next page. Press 4 to display the previous page.

3Press ENTER.

The unit starts playback from the selected scene.

Note:

For some discs, it may take some time before all the scenes appear on the TV screen.

42

Image 47
Contents RX-DV3RSL If in DOUBT-CONSULT a Competent Electrician RX-DV3RSL Important for Laser Products Above ALL Table of Contents Display Adjust button 27Parts Identification Front PanelParts Identification Remote ControlGetting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories FM antenna connection Connecting the FM and AM AntennasGetting Started AM antenna connectionSpeaker Layout Diagram Connecting the SpeakersConnecting the subwoofer speaker Connecting the front, center, and rear speakersFor audio connections Connecting Audio/Video ComponentsAbout connecting cables/cords For Scart connectionsDigital connection Cassette deck/CD recorder connectionRGB Audio OUT Scart connectionVCR STB Audio VideoFor T-V Link VCRSTB Set Top Box For TV and video formatSelect the Source to Play Turn On the PowerAdjust the Volume Basic OperationsActivating TV Direct Turning Off the Power with the Sleep TimerTurning Off the Sounds Temporarily Changing the Display BrightnessBasic Operations Input modeOn the remote control When DVD is selected as the source, you can alsoChanging the Source Name Attenuating the Input SignalActivating the Recording Mode Input ATT indicatorStart Playback Basic DVD Player OperationsOpen the Disc Tray Load a DiscPress Surround ON/OFF Select Surround Mode Stop PlaybackTurn Off the Power into Standby Activate Realistic Sound FieldTuner Operations Tuning into Stations Manually Using Preset TuningSelecting the FM Reception Mode Operation Buttons Using the RDS Radio Data System To Receive FM StationsWhat information can RDS signals provide? Tuner OperationsSearching for a Program By PTY Codes Case Switching to Broadcast Program Your Choice TemporarilySport NewsAffairs InfoOperation Buttons Basic SettingsOperating Procedure YES ¶ For subwooferLow frequency effect attenuator-LFE Basic SettingsSet the appropriate digital terminal setting Digital input Digital in terminals-DGTManual Select the source manually Auto surround-AUTO SRAuto mode-MODE On the displayAdjustment items Sound AdjustmentsPress Adjust Press Control 3 or 2 to adjust Front speaker balanceDAP effect level-EFFECT Adjusting sound from the remote controlFront speaker output balance -BAL balance Tone-BASS and TrebleDAP Digital Acoustic Processor modes Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundPossible × Impossible All Channel StereoReflections from behind Early reflections Direct sounds Selecting Surround Modes Activating Surround ModeCreating Realistic Sound Fields For using test tone Adjusting Surround Mode Using Remote ControlAdjust the sound Adjust the speaker output levels as followsDiscs you can play Disc Type DVD Player OperationsDisc Information Playable Disc TypesMenu-driven playback Disc structurePlayback Control function PBC Press on Screen Using the On-screen BarContents of the on-screen bar with the pull-down menu DVD Player OperationsChanging the Time Indication Basic Operation through the On-screen BarPress on Screen twice Press EnterFrom the VCD/SVCD menu with PBC Locating a Desired Scene from Disc MenuPress TOP Menu or Menu From the DVD menuPress and hold Angle for a few seconds Selecting a View Angle-ANGLEPress Angle Press Angle repeatedly to select the desired view anglePress Audio repeatedly to select the desired audio language Changing the Languages-SUBTITLEPress Subtitle Press AudioFor Svcd Press Audio repeatedly to select the desired audio channelSelecting the audio channel For VCDLocating a desired position-Time Search Playing from a Specified Position on a DiscUse the number buttons 0-9 to enter the time Locating a desired chapter-Chapter SearchLocating a desired scene-DIGEST Press DigestPress cursor 5/∞/3/2 to move to the desired scene Special Picture Playback To adjust the appearance of the picture Press cursor 3 or 2 repeatedly to select VFP modeRepeat steps 2 to 4 to adjust other parameters Changing the VFP setting-VFPPlaying back tracks in random order Program Playback and Random PlaybackRepeat to program the next steps Playing back in the desired orderRepeating a desired part Repeat PlaybackRepeating a current title, chapter, or all tracks Load an MP3 disc, then press MP3 Disc PlaybackBasic Operations Press Repeat Operations through the MP3 Control ScreenLoad a Jpeg disc, then press Jpeg Disc PlaybackSlide-show Playback Press Menu or Operations through the Jpeg Control ScreenChoice Menu Operations Operation Buttons Configuration of Choice MenuPress cursor ∞ or 5 repeatedly to select the desired option Press Enter to finish the settingPress Choice Press cursor ∞ or 5 repeatedly To move to on ScreenAuto Choice Menu OperationsLanguage menu Picture menuMAX Audio menuMP3 JpegReturn SPK. Setting menuRear Speaker SubwooferSelect this to deactivate it Others menuRestricting Playback by Parental Lock Setting Parental LockReleasing Parental Lock temporarily Changing the setting of Parental LockNew setting is stored Country/Area codes list for Parental Lock Glossary for DVD Player CD recorder Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierREW Operating Video ComponentsTV Return Try to operate your TV by pressing Changing the Preset Signal CodesOperating Other Manufacturers’ Equipment Release STANDBY/ON TVTry to operate your STB by pressing Enter manufacturer’s code usingNumber buttons 1-9 Release STANDBY/ON STBTry to operate your VCR by pressing Operating Other Manufacturers’ EquipmentEnter the manufacturer’s code Release STANDBY/ON VCRGeneral Notes MaintenanceCleaning Discs Cleaning the UnitGenaral TroubleshootingFor DVD Player For Jpeg TroubleshootingFor Tuner For MP3AM tuner SpecificationsAmplifier FM tuner IHF0602NHMMDWJEM