JVC RX-DV3RSL manual

Page 3

CAUTION

Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

Do not place any naked flame sources, such as lighted candles, on the apparatus.

When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids such as vases, shall be placed on the apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage. Locate the apparatus as follows:

Front:

No obstructions open spacing.

Sides:

No obstructions in 10 cm from the sides.

Top:

No obstructions in 10 cm from the top.

Back:

No obstructions in 15 cm from the back

Bottom:

No obstructions, place on the level surface.

In addition, maintain the best possible air circulation as illustrated.

Wall or

obstructions

Spacing 15 cm or more

RX-DV3RSL

Front

Stand height

15 cm or more

Floor

G-2

Image 3
Contents RX-DV3RSL If in DOUBT-CONSULT a Competent Electrician RX-DV3RSL Important for Laser Products Above ALL Table of Contents Display Adjust button 27Parts Identification Front PanelParts Identification Remote ControlBefore Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started FM antenna connection Connecting the FM and AM AntennasGetting Started AM antenna connectionSpeaker Layout Diagram Connecting the SpeakersConnecting the subwoofer speaker Connecting the front, center, and rear speakersFor audio connections Connecting Audio/Video ComponentsAbout connecting cables/cords For Scart connectionsDigital connection Cassette deck/CD recorder connectionRGB Audio OUT Scart connectionVCR STB Audio VideoFor T-V Link VCRSTB Set Top Box For TV and video formatSelect the Source to Play Turn On the PowerAdjust the Volume Basic OperationsActivating TV Direct Turning Off the Power with the Sleep TimerTurning Off the Sounds Temporarily Changing the Display BrightnessBasic Operations Input modeOn the remote control When DVD is selected as the source, you can alsoChanging the Source Name Attenuating the Input SignalActivating the Recording Mode Input ATT indicatorStart Playback Basic DVD Player OperationsOpen the Disc Tray Load a DiscPress Surround ON/OFF Select Surround Mode Stop PlaybackTurn Off the Power into Standby Activate Realistic Sound FieldTuner Operations Tuning into Stations Manually Using Preset TuningSelecting the FM Reception Mode Operation Buttons Using the RDS Radio Data System To Receive FM StationsWhat information can RDS signals provide? Tuner OperationsSearching for a Program By PTY Codes Case Switching to Broadcast Program Your Choice TemporarilySport NewsAffairs InfoBasic Settings Operating ProcedureOperation Buttons YES ¶ For subwooferLow frequency effect attenuator-LFE Basic SettingsSet the appropriate digital terminal setting Digital input Digital in terminals-DGTManual Select the source manually Auto surround-AUTO SRAuto mode-MODE On the displayAdjustment items Sound AdjustmentsPress Adjust Press Control 3 or 2 to adjust Front speaker balanceDAP effect level-EFFECT Adjusting sound from the remote controlFront speaker output balance -BAL balance Tone-BASS and TrebleDAP Digital Acoustic Processor modes Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundAll Channel Stereo Reflections from behind Early reflections Direct soundsPossible × Impossible Activating Surround Mode Creating Realistic Sound FieldsSelecting Surround Modes For using test tone Adjusting Surround Mode Using Remote ControlAdjust the sound Adjust the speaker output levels as followsDiscs you can play Disc Type DVD Player OperationsDisc Information Playable Disc TypesDisc structure Playback Control function PBCMenu-driven playback Press on Screen Using the On-screen BarContents of the on-screen bar with the pull-down menu DVD Player OperationsChanging the Time Indication Basic Operation through the On-screen BarPress on Screen twice Press EnterFrom the VCD/SVCD menu with PBC Locating a Desired Scene from Disc MenuPress TOP Menu or Menu From the DVD menuPress and hold Angle for a few seconds Selecting a View Angle-ANGLEPress Angle Press Angle repeatedly to select the desired view anglePress Audio repeatedly to select the desired audio language Changing the Languages-SUBTITLEPress Subtitle Press AudioFor Svcd Press Audio repeatedly to select the desired audio channelSelecting the audio channel For VCDLocating a desired position-Time Search Playing from a Specified Position on a DiscUse the number buttons 0-9 to enter the time Locating a desired chapter-Chapter SearchPress Digest Press cursor 5/∞/3/2 to move to the desired sceneLocating a desired scene-DIGEST Special Picture Playback To adjust the appearance of the picture Press cursor 3 or 2 repeatedly to select VFP modeRepeat steps 2 to 4 to adjust other parameters Changing the VFP setting-VFPPlaying back tracks in random order Program Playback and Random PlaybackRepeat to program the next steps Playing back in the desired orderRepeat Playback Repeating a current title, chapter, or all tracksRepeating a desired part MP3 Disc Playback Basic OperationsLoad an MP3 disc, then press Press Repeat Operations through the MP3 Control ScreenJpeg Disc Playback Slide-show PlaybackLoad a Jpeg disc, then press Press Menu or Operations through the Jpeg Control ScreenChoice Menu Operations Operation Buttons Configuration of Choice MenuPress cursor ∞ or 5 repeatedly to select the desired option Press Enter to finish the settingPress Choice Press cursor ∞ or 5 repeatedly To move to on ScreenAuto Choice Menu OperationsLanguage menu Picture menuMAX Audio menuMP3 JpegReturn SPK. Setting menuRear Speaker SubwooferSelect this to deactivate it Others menuRestricting Playback by Parental Lock Setting Parental LockChanging the setting of Parental Lock New setting is storedReleasing Parental Lock temporarily Country/Area codes list for Parental Lock Glossary for DVD Player CD recorder Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierOperating Video Components TV ReturnREW Try to operate your TV by pressing Changing the Preset Signal CodesOperating Other Manufacturers’ Equipment Release STANDBY/ON TVTry to operate your STB by pressing Enter manufacturer’s code usingNumber buttons 1-9 Release STANDBY/ON STBTry to operate your VCR by pressing Operating Other Manufacturers’ EquipmentEnter the manufacturer’s code Release STANDBY/ON VCRGeneral Notes MaintenanceCleaning Discs Cleaning the UnitGenaral TroubleshootingFor DVD Player For Jpeg TroubleshootingFor Tuner For MP3AM tuner SpecificationsAmplifier FM tuner IHF0602NHMMDWJEM