JVC RX-DV3RSL manual Choice Menu Operations, Operation Buttons Configuration of Choice Menu

Page 56

Choice Menu Operations

You can adjust the initial settings through the choice menu on the TV.

Before operating the choice menu, select the source you want to adjust by pressing source selecting button.

When selecting FM or AM as the source, you cannot use the choice menu.

When selecting the source other than DVD, FM, and AM, you can use the AUDIO and SPK. SETTING menus. The audio adjustments are memorized for each source.

When activating TV Direct, you can use the LANGUAGE, PICTURE, and OTHERS menus for the build-in DVD player.

Notes:

You need to turn on your TV and select the correct input mode on the TV.

You can only use the remote control for the choice menu operations.

You can change the language used in the choice menu. See page 53.

You cannot show the choice menu when an MP3 disc or a JPEG disc is loaded.

Operation Buttons

 

Configuration of Choice Menu

To do the operations in this choice menu, use the buttons on the

 

The choice menu has the following menus:

remote control.

 

 

CHOICE

ENTER

From the remote control ONLY

LANGUAGE menu (see page 53)

You can select the initial language for the disc menu, audio, and subtitle. You can also select the language used on the TV screen while operating this unit.

LANGUAGE

 

MENU LANGUAGE

ENGLISH

AUDIO LANGUAGE

ENGLISH

SUBTITLE

OFF

ON SCREEN LANGUAGE ENGLISH

SELECT

USE

TO SELECT, USE ENTER TO CONFIRM.

ENTER

TO EXIT, PRESS CHOICE.

 

 

 

Button

To do

 

 

 

Display the choice menu on the TV.

CHOICE

Each time you press the button, the

choice menu is turned on and off

 

 

alternately.

 

 

5/

Select an item.

 

PICTURE menu (see page 53)

You can select the desired

PICTURE

 

MONITOR TYPE

4:3 LB

options concerning a picture or

STILL MODE

AUTO

monitor screen.

SCREEN SAVER

ON

MP3 / JPEG

MP3

 

SELECT

USE

TO SELECT, USE ENTER TO CONFIRM.

ENTER

TO EXIT, PRESS CHOICE.

 

 

 

3/2

Adjust the selected item on the choice

menu.

 

 

 

ENTER

Move to the submenu of the selected

item or decide the setting.

AUDIO menu (see page 54)

You can adjust the sound settings of this unit through this menu.

SPK. SETTING menu (see page 55)

You can adjust the speaker settings. You can also adjust the output level of the speakers.

OTHERS menu (see page 56)

You can change the settings for some of the functions.

To set Parental Lock, use this menu.

AUDIO

 

 

L/R BALANCE

CENTER

BASS

 

0

TREBLE

 

0

LFE ATT.

 

0 dB

D. RANGE COMPRESSION MID

SELECT

USE

TO SELECT, USE ENTER TO CONFIRM.

ENTER

TO EXIT, PRESS CHOICE.

SPK. SETTING

 

 

 

 

SIZE

 

 

 

LEVEL

 

 

 

DISTANCE

 

 

 

CROSS OVER

100Hz

 

RETURN TO INITIAL

 

SELECT

USE

TO SELECT, USE ENTER TO CONFIRM.

ENTER

TO EXIT, PRESS CHOICE.

 

OTHERS

 

 

RESUME

 

ON

ON SCREEN GUIDE

ON

AUTO STANDBY

OFF

PARENTAL LOCK

 

SELECT

USE

TO SELECT, USE ENTER TO CONFIRM.

ENTER

TO EXIT, PRESS CHOICE.

51

Image 56
Contents RX-DV3RSL If in DOUBT-CONSULT a Competent Electrician RX-DV3RSL Important for Laser Products Above ALL Table of Contents Adjust button 27 Parts IdentificationFront Panel DisplayRemote Control Parts IdentificationGetting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Connecting the FM and AM Antennas Getting StartedAM antenna connection FM antenna connectionConnecting the Speakers Connecting the subwoofer speakerConnecting the front, center, and rear speakers Speaker Layout DiagramConnecting Audio/Video Components About connecting cables/cordsFor Scart connections For audio connectionsCassette deck/CD recorder connection Digital connectionScart connection VCR STB AudioVideo RGB Audio OUTVCR STB Set Top BoxFor TV and video format For T-V LinkTurn On the Power Adjust the VolumeBasic Operations Select the Source to PlayTurning Off the Power with the Sleep Timer Turning Off the Sounds TemporarilyChanging the Display Brightness Activating TV DirectInput mode On the remote controlWhen DVD is selected as the source, you can also Basic OperationsAttenuating the Input Signal Activating the Recording ModeInput ATT indicator Changing the Source NameBasic DVD Player Operations Open the Disc TrayLoad a Disc Start PlaybackSelect Surround Mode Stop Playback Turn Off the Power into StandbyActivate Realistic Sound Field Press Surround ON/OFFTuning into Stations Manually Using Preset Tuning Tuner OperationsSelecting the FM Reception Mode Using the RDS Radio Data System To Receive FM Stations What information can RDS signals provide?Tuner Operations Operation ButtonsSearching for a Program By PTY Codes Switching to Broadcast Program Your Choice Temporarily CaseNews AffairsInfo SportOperation Buttons Basic SettingsOperating Procedure ¶ For subwoofer YESBasic Settings Set the appropriate digital terminal settingDigital input Digital in terminals-DGT Low frequency effect attenuator-LFEAuto surround-AUTO SR Auto mode-MODEOn the display Manual Select the source manuallySound Adjustments Press AdjustPress Control 3 or 2 to adjust Front speaker balance Adjustment itemsAdjusting sound from the remote control Front speaker output balance -BAL balanceTone-BASS and Treble DAP effect level-EFFECTCreating Realistic Sound Fields Dolby SurroundDTS Digital Surround DAP Digital Acoustic Processor modesPossible × Impossible All Channel StereoReflections from behind Early reflections Direct sounds Selecting Surround Modes Activating Surround ModeCreating Realistic Sound Fields Adjusting Surround Mode Using Remote Control Adjust the soundAdjust the speaker output levels as follows For using test toneDVD Player Operations Disc InformationPlayable Disc Types Discs you can play Disc TypeMenu-driven playback Disc structurePlayback Control function PBC Using the On-screen Bar Contents of the on-screen bar with the pull-down menuDVD Player Operations Press on ScreenBasic Operation through the On-screen Bar Press on Screen twicePress Enter Changing the Time IndicationLocating a Desired Scene from Disc Menu Press TOP Menu or MenuFrom the DVD menu From the VCD/SVCD menu with PBCSelecting a View Angle-ANGLE Press AnglePress Angle repeatedly to select the desired view angle Press and hold Angle for a few secondsChanging the Languages-SUBTITLE Press SubtitlePress Audio Press Audio repeatedly to select the desired audio languagePress Audio repeatedly to select the desired audio channel Selecting the audio channelFor VCD For SvcdPlaying from a Specified Position on a Disc Use the number buttons 0-9 to enter the timeLocating a desired chapter-Chapter Search Locating a desired position-Time SearchLocating a desired scene-DIGEST Press DigestPress cursor 5/∞/3/2 to move to the desired scene Special Picture Playback Press cursor 3 or 2 repeatedly to select VFP mode Repeat steps 2 to 4 to adjust other parametersChanging the VFP setting-VFP To adjust the appearance of the pictureProgram Playback and Random Playback Repeat to program the next stepsPlaying back in the desired order Playing back tracks in random orderRepeating a desired part Repeat PlaybackRepeating a current title, chapter, or all tracks Load an MP3 disc, then press MP3 Disc PlaybackBasic Operations Operations through the MP3 Control Screen Press RepeatLoad a Jpeg disc, then press Jpeg Disc PlaybackSlide-show Playback Operations through the Jpeg Control Screen Press Menu orOperation Buttons Configuration of Choice Menu Choice Menu OperationsPress Enter to finish the setting Press ChoicePress cursor ∞ or 5 repeatedly To move to on Screen Press cursor ∞ or 5 repeatedly to select the desired optionChoice Menu Operations Language menuPicture menu AutoAudio menu MP3Jpeg MAXSPK. Setting menu Rear SpeakerSubwoofer ReturnOthers menu Select this to deactivate itSetting Parental Lock Restricting Playback by Parental LockReleasing Parental Lock temporarily Changing the setting of Parental LockNew setting is stored Country/Area codes list for Parental Lock Glossary for DVD Player Operating JVC’s Audio/Video Components Operating Audio ComponentsSound control section Amplifier CD recorderREW Operating Video ComponentsTV Return Changing the Preset Signal Codes Operating Other Manufacturers’ EquipmentRelease STANDBY/ON TV Try to operate your TV by pressingEnter manufacturer’s code using Number buttons 1-9Release STANDBY/ON STB Try to operate your STB by pressingOperating Other Manufacturers’ Equipment Enter the manufacturer’s codeRelease STANDBY/ON VCR Try to operate your VCR by pressingMaintenance Cleaning DiscsCleaning the Unit General NotesTroubleshooting GenaralFor DVD Player Troubleshooting For TunerFor MP3 For JpegSpecifications AmplifierFM tuner IHF AM tuner0602NHMMDWJEM