JVC RX-DV3RSL manual Above ALL

Page 5

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way–switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode.

Switch off using the switch on the equipment and make sure that your family know how to do this.

Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case -this could result in a fatal electrical shock.;

NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

G-4

Image 5
Contents RX-DV3RSL If in DOUBT-CONSULT a Competent Electrician RX-DV3RSL Important for Laser Products Above ALL Table of Contents Parts Identification Adjust button 27Front Panel DisplayParts Identification Remote ControlGetting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Getting Started Connecting the FM and AM AntennasAM antenna connection FM antenna connectionConnecting the subwoofer speaker Connecting the SpeakersConnecting the front, center, and rear speakers Speaker Layout DiagramAbout connecting cables/cords Connecting Audio/Video ComponentsFor Scart connections For audio connectionsDigital connection Cassette deck/CD recorder connectionVCR STB Audio Scart connectionVideo RGB Audio OUTSTB Set Top Box VCRFor TV and video format For T-V LinkAdjust the Volume Turn On the PowerBasic Operations Select the Source to PlayTurning Off the Sounds Temporarily Turning Off the Power with the Sleep TimerChanging the Display Brightness Activating TV DirectOn the remote control Input modeWhen DVD is selected as the source, you can also Basic OperationsActivating the Recording Mode Attenuating the Input SignalInput ATT indicator Changing the Source NameOpen the Disc Tray Basic DVD Player OperationsLoad a Disc Start PlaybackTurn Off the Power into Standby Select Surround Mode Stop PlaybackActivate Realistic Sound Field Press Surround ON/OFFTuner Operations Tuning into Stations Manually Using Preset TuningSelecting the FM Reception Mode What information can RDS signals provide? Using the RDS Radio Data System To Receive FM StationsTuner Operations Operation ButtonsSearching for a Program By PTY Codes Case Switching to Broadcast Program Your Choice TemporarilyAffairs NewsInfo SportOperation Buttons Basic SettingsOperating Procedure YES ¶ For subwooferSet the appropriate digital terminal setting Basic SettingsDigital input Digital in terminals-DGT Low frequency effect attenuator-LFEAuto mode-MODE Auto surround-AUTO SROn the display Manual Select the source manuallyPress Adjust Sound AdjustmentsPress Control 3 or 2 to adjust Front speaker balance Adjustment itemsFront speaker output balance -BAL balance Adjusting sound from the remote controlTone-BASS and Treble DAP effect level-EFFECTDolby Surround Creating Realistic Sound FieldsDTS Digital Surround DAP Digital Acoustic Processor modesPossible × Impossible All Channel StereoReflections from behind Early reflections Direct sounds Selecting Surround Modes Activating Surround ModeCreating Realistic Sound Fields Adjust the sound Adjusting Surround Mode Using Remote ControlAdjust the speaker output levels as follows For using test toneDisc Information DVD Player OperationsPlayable Disc Types Discs you can play Disc TypeMenu-driven playback Disc structurePlayback Control function PBC Contents of the on-screen bar with the pull-down menu Using the On-screen BarDVD Player Operations Press on ScreenPress on Screen twice Basic Operation through the On-screen BarPress Enter Changing the Time IndicationPress TOP Menu or Menu Locating a Desired Scene from Disc MenuFrom the DVD menu From the VCD/SVCD menu with PBCPress Angle Selecting a View Angle-ANGLEPress Angle repeatedly to select the desired view angle Press and hold Angle for a few secondsPress Subtitle Changing the Languages-SUBTITLEPress Audio Press Audio repeatedly to select the desired audio languageSelecting the audio channel Press Audio repeatedly to select the desired audio channelFor VCD For SvcdUse the number buttons 0-9 to enter the time Playing from a Specified Position on a DiscLocating a desired chapter-Chapter Search Locating a desired position-Time SearchLocating a desired scene-DIGEST Press DigestPress cursor 5/∞/3/2 to move to the desired scene Special Picture Playback Repeat steps 2 to 4 to adjust other parameters Press cursor 3 or 2 repeatedly to select VFP modeChanging the VFP setting-VFP To adjust the appearance of the pictureRepeat to program the next steps Program Playback and Random PlaybackPlaying back in the desired order Playing back tracks in random orderRepeating a desired part Repeat PlaybackRepeating a current title, chapter, or all tracks Load an MP3 disc, then press MP3 Disc PlaybackBasic Operations Press Repeat Operations through the MP3 Control ScreenLoad a Jpeg disc, then press Jpeg Disc PlaybackSlide-show Playback Press Menu or Operations through the Jpeg Control ScreenChoice Menu Operations Operation Buttons Configuration of Choice MenuPress Choice Press Enter to finish the settingPress cursor ∞ or 5 repeatedly To move to on Screen Press cursor ∞ or 5 repeatedly to select the desired optionLanguage menu Choice Menu OperationsPicture menu AutoMP3 Audio menuJpeg MAXRear Speaker SPK. Setting menuSubwoofer ReturnSelect this to deactivate it Others menuRestricting Playback by Parental Lock Setting Parental LockReleasing Parental Lock temporarily Changing the setting of Parental LockNew setting is stored Country/Area codes list for Parental Lock Glossary for DVD Player Operating Audio Components Operating JVC’s Audio/Video ComponentsSound control section Amplifier CD recorderREW Operating Video ComponentsTV Return Operating Other Manufacturers’ Equipment Changing the Preset Signal CodesRelease STANDBY/ON TV Try to operate your TV by pressingNumber buttons 1-9 Enter manufacturer’s code usingRelease STANDBY/ON STB Try to operate your STB by pressingEnter the manufacturer’s code Operating Other Manufacturers’ EquipmentRelease STANDBY/ON VCR Try to operate your VCR by pressingCleaning Discs MaintenanceCleaning the Unit General NotesGenaral TroubleshootingFor DVD Player For Tuner TroubleshootingFor MP3 For JpegAmplifier SpecificationsFM tuner IHF AM tuner0602NHMMDWJEM