JVC RX-DV3RSL manual Operating Other Manufacturers’ Equipment, Enter the manufacturer’s code

Operating Other Manufacturers’ Equipment

7To change the transmittable signals for operating other manufacturers’ VCR

1. Press and hold	STANDBY/ON
STANDBY/ON VCR.	STB VCR TV AUDIO

2. Press VCR.	TV	TAPE	CDR	FM/AM
	TV DIRECT	STB	VCR	DVD

3. Enter the manufacturer’s code	EFFECT	CENTER
using the number buttons (1–9, 0).	1	2	3
	TEST	REAR·L
See the right to find the code.
	4	5	6
	SURR ON/OFF	REAR·R
	7	8	9
	SURR MODE – SUBWOOFER +
	10/0	+10
		100+

4. Release STANDBY/ON VCR.

You can turn on and off the VCR:

STANDBY/ON VCR : Turns on or off the VCR.

After pressing VCR, you can perform the following operations on a VCR:

1 – 9, 0 : Selects the TV channels on a VCR. For channel number 5, press 5.

For channel number 10, press 1, then 0. For channel number 23, press 2, then 3.

TV RETURN will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.

3: Starts playing.

REW : Rewinds a tape.

FF: Fast-winds a tape.

7 : Stops operations.

8 : Pauses playing. To release it, press 3.

Note:

• Refer also to the manual supplied with your VCR.

5.Try to operate your VCR by pressing

STANDBY/ON VCR.

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.

Manufactures’ codes for VCR

Manufacturer	Codes
JVC	00*, 26 –29, 58
Aiwa	01, 02
Bell&Howell	03
Blaupunkt	04, 05
CGM	06, 07
Emerson	08, 10 – 12, 64, 65
Fisher	03, 14 – 17
Funai	01
GE	18 – 20
Goldstar	07
Goodmans	13, 21
Grundig	06, 22
Hitachi	18, 23 – 25, 66
Loewe	07, 21
Magnavox	04, 19, 24
Mitsubishi	30 – 35
NEC	26, 27
Nokia	03, 36
Nordmende	38
Orion	09
Panasonic	19, 24, 39, 40
Philips	04, 19, 21, 24, 41, 42
Phonola	21
RCA/PROSC	04, 18, 19, 23, 24, 43 – 45
SABA	38, 46
Samsung	45, 47, 59, 61 – 63
Sanyo	03, 48, 49
Sharp	37, 50
Siemens	03, 51
Sony	52 – 54
Telefunken	55, 60
Toshiba	43, 44
Zenith	56, 57

*“00” is the initial JVC code.

Note:

•Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

65