Cateye EC-3700, EC-3600 service manual 1Removing the Frame Covers

Applicable Models: EC-1200EC-1600

D-1Removing the Frame Covers

Upright Type (EC-1200 & EC-1600)

When any repair or adjustment of parts within the frame is required, remove the frame covers in the following procedures.

REMOVAL

1.Remove the pedals at both the left and right sides. (The right side pedal can be removed by turning it in the clockwise direction, and the left side pedal can be removed in the counter-clockwise direction.) (Fig. 1)

2.Remove the crank cover fixing screws. The narrow-width area of the crank cover should be positioned in between the frame cover and the crank. (Fig. 2)

3.Remove the leg pipe fixing screws. (Fig. 3)

*You do not have to remove the leg pipe itself.

*For the model EC-1600, remove the leg pipe cover.

4.Shift the rubber base at the seat post lock knob away from the center cover.

5.Loosen the center cover fixing screw a little, and lift the center cover upward. (Do not remove it.) (Fig. 4)

6.Loosen the four screws on the inlet cover. (Fig. 5)

7.Remove the frame cover fixing screw with a screwdriver before removing the frame cover. (Fig. 6)

ASSEMBLING

No. 15 Wrench

Crank

Pedal

Crank Cover

Fig. 1 Fig. 2

Leg Pipe Fixing Screw

ON

OFF

Front Rear

Leg Pipe Fixing Screw

Lift upward.

Center Cover

D-1Removing the Frame Covers

1.Place the frame covers onto the frame at both right and left sides, paying attention to the position of the crank.

2.Fix the right and left frame covers with frame cover fixing screws.

3.Mount the inlet cover with four screws. (Fig. 5)

4.Set the center cover to the frame cover correctly in position, and fix it with the center cover fixing screws. (Fig. 4)

5.Pass the crank through the hole on the crank cover, and fix the crank cover onto the frame cover with screws. (Fig. 2)

6.Set the rubber base for the seat post lock knob, and then mount the right and left pedals.

7.Fix the leg pipe with the leg pipe fixing screws. (For the model EC-1600, mount the leg pipe cover.)

Center Cover Fixing Screw

Fig. 3 Fig. 4

Frame Cover

ON

OFF	Four (4)
	Screws

Inlet Cover

Fig. 5 Fig. 6

Cateye Ergociser Series 1000 Service Manual

22