Cateye EC-3700 Flywheel, MS-2Replacing the Workload Unit, ÀMounting the Brandnew Workload Unit

Applicable Models: EC-1600 EC-3600 EC-3700

(w/ Flywheel)

MS-2Replacing the Workload Unit (w/ Flywheel)

àRemoving the Workload Unit

1.Remove the gear crank and the chain by referring to Items 1 through 4 of the Section MS-1 "Replacing the Workload Unit (w/o Flywheel) (1)."

2.Loosen the flywheel fixing nut which is fixed to the flywheel metal base. (Fig. 1)

3.Remove the four bolts which fix the flywheel metal base, and remove the plain belt. (Fig. 2)

4.Remove the workload unit by referring to Items 5 and 6 of the Section MS-1 "Replacing the Workload Unit (w/o flywheel)

(1)."

àMounting the Brandnew Workload Unit

1.Assemble the brandnew workload unit so that it will engage with the workload unit mounting metal base of the frame (Fig.

1). [See the Item 1 of the Section MS-1 "Replacing the Workload Unit (w/o flywheel) (2)."]

2.Hang the plain belt on the flywheel, and fix it to the flywheel metal base with the flywheel fixing nut.

3.Provisionally fasten the metal base fixing screw (4 pieces) to the flywheel fixing metal base and the frame respectively. (Fig.

4.Mount the workload unit by referring to Items 2 to 6 of the Section MS-1 "Replacing the Workload Unit (w/o flywheel)

(2)."

àAdjusting the Flywheel

Fig. 1

Flywheel

Workload Unit

EC-1600

Flywheel

Flywheel Fixing Nut

Flywheel

Workload Unit EC-3600 & EC-3700

Flywheel Fixing Nut

Flywheel Metal Base

Plain Belt

Flywheel Fixing Metal Base

Metal Base Fixing

Screw

MS-2Replacing the Workload Unit

1.Adjust the flywheel by referring to the Section MS-3 "Adjusting the Flywheel."

Fig. 2

Cateye Ergociser Series 1000 Service Manual

38