JVC RX-DP20VBKC Canceling the Zone 2 Operations, To stop Zone 2 operations and sounds through

Page 33
STANDBY
STANDBY / ON

To turn off the power (into standby mode),

press

(STANDBY/ON) again.

The STANDBY lamp lights up, and the front door automatically closes. (The ZONE 1 ON/ OFF and/or ZONE 2 ON/OFF lamp goes off.)

•A small amount of power is consumed in standby mode. To turn the power off completely, unplug the AC power cord.

From the remote control:

1. Set ZONE 1/ZONE 2 (LEARN/

LEARN TRANSMIT

TRANSMIT) selector to “ZONE 2.”

Now the buttons and controls on the remote

ZONE 1 ZONE 2

control work for Zone 2 operations.

2. Press AUDIO (ON).

The STANDBY lamp on the unit goes off, and the ZONE 2 ON/ OFF lamp on the unit lights up.

Canceling the Zone 2 Operations

On the unit:

 

 

To stop Zone 2 operations and sounds through the

ZONE 2

Zone 2 speakers, press ZONE 2 ON/OFF so that the

ON/OFF

 

ZONE 2 ON/OFF lamp goes off.

 

 

No sound will be heard in Zone 2, and the display

 

 

changes to show the Zone 1 source.

 

 

 

 

 

 

 

 

SPEAKERS 1

ZONE 2

 

 

 

VOLUME

 

 

 

dB

 

 

 

 

 

 

 

 

 

ANALOG

SPEAKERS 1

 

 

LR

 

 

 

 

 

SUBWFR

 

VOLUME

 

 

 

dB

 

 

 

 

STANDBY ON

ZONE 2

ON/OFF

• When connecting the Zone 2 front speakers to the FRONT 2/

ZONE 2 SPEAKERS terminal, see also “w Setting the Zone

To use this receiver for Zone 2 operations again

1.Press ZONE 2 ON/OFF again so that the ZONE 2 ON/OFF lamp lights up.

2.Press ZONE 2 CONTROL (inside the front door).

The name of the current source for Zone 2 appears on the display.

ZONE 2

ON/OFF

ZONE 2

CONTROL

2/Speakers 2 Usage—ZONE 2/SPEAKER 2” on page 43, and

“Activating the Zone 2 Front Speakers” on page 32.

To turn off the power (into standby mode),

 

 

 

 

 

 

 

 

press AUDIO

 

(STANDBY).

STANDBY

ON

 

The STANDBY lamp lights up, and the front

 

 

 

 

 

 

 

 

door automatically closes. (The ZONE 1 ON/

 

 

 

 

OFF and/or ZONE 2 ON/OFF lamp on the unit

 

 

 

 

goes off.)

 

 

 

 

Note:

If you have turned off the receiver with the volume level set at more than level “–35 dB,” the volume level will be automatically set at level “–35 dB” next time you turn on the receiver.

SPEAKERS 1

ZONE 2

VOLUME

dB

From the remote control:

To stop Zone 2 operations and sounds through the

ZONE 2

ON/OFF

Zone 2 speakers, press ZONE 2 ON/OFF so that the

 

ZONE 2 ON/OFF lamp on the unit goes off.

To use this receiver for Zone 2 operations

again, press ZONE 2 ON/OFF again.

Notes:

•If you have turned off Zone 2 with the volume level set at more than level “–35 dB,” the volume level will be automatically set at level “–35 dB” next time you turn on Zone 2.

•If “TURN ON ZONE1 OR ZONE2” appears on the display, press ZONE 1 ON/OFF or ZONE 2 ON/OFF to listen to the sound in Zone 1 or in Zone 2; otherwise, the receiver will turn off after about 1 minute.

30

Page 32 Page 34
Image 33
Page 32 Page 34
Contents LVT0965-001AJ RX-DP20VBK23.5 kg / 52.0 lb For the main unit Introduction Features PrecautionsTable of Contents Front Panel Parts IdentificationDisplay Window To open the front doorAnalog indicator Dual indicatorDgtl Auto indicator 96/24 indicatorRear Panel Q w e r tRemote Control Checking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Getting StartedBasic connecting procedure Connecting the SpeakersAM Antenna Connections Turn the loop until you have the best receptionZone 1 speaker layout Front speakers and center speakerSurround and surround back speakers Connecting a subwoofer Enhance your audio systemAbout the Front 2/ZONE 2 Speakers terminals Analog Connections Connecting Audio/Video ComponentsWhen using the digital input terminal When attaching the front Terminal coverExternal 7.1-channel Output component Video cameraVHS/S-VHS/VHS F G VCR VCRsDBS tuner TV and/or DBS tunerWhen you connect the DVD player with stereo output jacks DVD playerDVD player Digital Connections Digital output terminalDigital input terminals Find a place where you can attach the IR signal transmitter Using the RF Rod Antenna and IR Signal TransmitterSetting Up the RF Rod Antenna Setting Up the IR Signal TransmitterConnecting the Power Cord Putting Batteries in the Remote ControlWhen using the remote control in the dark Replace the coverMulti-Room Operations Power amplifierRequired Connections for Zone Connection Å Connection ıBasic Operating Procedure for Zone Press Zone 2 ON/OFF so that Turn Master Volume toZone 2 ON/OFF lamp lights up Press Zone 2 Control so that ControlTo turn on the power, press Turning the Power On and Off StandbyTo turn off the power into standby mode Zone 1 Main Room OperationsSpeaker and signal indicators on the display Canceling the Zone 1 OperationsSelecting the Zone 1 Source to Play Press one of the source selecting buttonsSelecting different sources for picture and sound Adjusting the Zone 1 VolumeSelecting the Analog or Digital Input Mode Activating the Zone 1 Front SpeakersMode Attenuating the Input Signal Muting the Zone 1 SoundAnalog Making Sounds Natural Changing the Display BrightnessTurning Analog Direct On and Off Changing the Source NameBasic adjustment auto memory Using the Sleep TimerPress Sleep repeatedly Recording a SourceZone 2 Sub-room Operations Last Zone Zone 2 volume Source appearsPress Zone 2 Control inside Front door so that ZoneZone 2 Speakers terminal, see also w Setting the Zone Canceling the Zone 2 OperationsTo stop Zone 2 operations and sounds through To use this receiver for Zone 2 operationsSelecting the Zone 2 Source to Play Adjusting the Zone 2 VolumeDVD DownFront speakers Activating the Zone 2 Front SpeakersMuting the Zone 2 Sound To deactivate the Zone 2 front speakers, press Zone 2 againEx. When you press FM/AM With Zone 1/ZONE Tuning in to Stations ManuallyReceiving Radio Broadcasts Press FM/AMSelecting the FM Reception Mode Using Preset TuningSetup Menu Configuration Basic SettingsOperation through On-Screen Display Menus Menu operation buttonsButton To do Menu Operating Procedure Press Setup MenuPress SET Adjusting the Speaker Channel Output Levels-CHANNEL Level Setting the Speakers-SPEAKER SettingYES 1SPKOFF AutoFront L Level Front R LevelSetting the Bass Sounds-SUBWOOFER Setting the Speaker DistanceFor each speaker LFESetting the THX Audio-THX Audio Setup ApartClose Setting the Audio Delay Level-AUDIO Delay Setting the Surround Channel Output Speakers-SURR CH OUTSetting the Digital Input/Output Terminals Selecting the Dual Mono Sound-DUAL MonoSetting the Zone 2/Speakers 2 Usage Setting the Video Input TerminalsTurning On and Off the Video Output PCMSuperimposing the Menus-SUPERIMPOSE Memorizing the Volume Level for Each Source-ONE Touch OPEShowing the Text Information on the Display-FL Display TextAdjustment Menu Configuration Sound AdjustmentsAdjust Menu Midnight ModeDisplay or erase the Adjustment Menu Select a submenu on the Adjustment MenuOr an item on a submenu downwards or Ex.When adjusting the DSP effects Press Adjust MenuSet other items on the same submenu if necessary Same submenu Press # or @ Right or Left to setSubmenu items Adjustment procedureBass MIDSetting the Midnight Mode-MIDNIGHT Mode Adjusting the Various EffectsWhen one of the DSP modes except ALL CH Stereo is activated When Neo6 Music is activated When Dolby Pro Logic II Music is activatedPress Liveness repeatedly to adjust Overall level of the effect 1 toUsing the Surround and THX Modes Reproducing Theater AmbienceIntroducing the Surround and THX Modes Dolby Pro Logic Dolby Digital EXDTS Digital Surround DTS Extended Surround DTS-ESSurround and THX Modes Applicable to the Various Software ZoneES/EX/7.1 Available Available THX Mode Incoming Signal Type 2-channel Available Surround ModeAbout Dialog Normalization Activating the Surround and THX ModesActivating the 7.1-channel reproduction EXES7.1 onTo cancel the Surround mode Press Surround to activate the Surround ModeEx. When Dolby Digital is activated To adjust the speaker output level using the remote controlTo cancel the THX mode without canceling the Surround mode Press THX to activate the THX modeTo cancel the THX and Surround modes 3D Headphone ModeHeadphone Mode Using the DSP ModesReproducing the Sound Field Introducing the DSP ModesTo cancel the DSP modes To adjust the DSP effectsPress Effect repeatedly to adjust the level Activating the DSP ModesUsing the Analog Multi-channel Playback Mode Activating the Analog Multi-channelPlayback Modes Remote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemMD recorder CD recorderWhen you turn off the Zone 1 sound by pressing Automatic Power Off StandbyWhen you turn off the Zone 2 source by pressing At the same timeRX-DP20VBK Text Compu Link Remote Control SystemDisplaying the Disc Information on the TV screen Disc Search Only for CD PlayerDisc Information screen Press Text Display while CD or MD is selected as the sourceTo exit from the Disc information screen Zone 2 LearnPress % / fi to move to SEARCH, then press Press Text Display while CD is selected as the sourcePress % / fi to move to Performer Then press SET Press SET againPress % / fi to move To GENRE, then Press SET Press % / fi to move to SEARCH, then press SETPress % / fi to move to Title INPUT, then press SET Entering the Disc InformationPress % / fi to move to the genre you want, then press SET Enter the disc title, referring to steps 3Press Text Display while MD is selected as the source Press % / fi to move to Title Input Then press SETConnections 1 IR Signal Transmitter Connection AV Compu Link Remote Control SystemIR signal transmitter Connections 2 AV Compu Link ConnectionConnections 3 Video Cable Connection CaseOne-Touch Video Play Automatic Power On Automatic Power On/Off StandbyWhen you turn off the Zone 2 sound by pressing One-Touch DVD PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsTuner Sound control section AmplifierCD player-changer CD playerTurntable CD recorderVCR VCR connected to the VCR 1 jacks Operating Video Components¶ REC DVD playerOperating Other Manufacturers’ Equipment Changing the Preset Signal CodesPress and hold VCR Enter a manufacturer’s code usingPress VCR Buttons 1-9,Release Audio on Press and hold Audio Standby Press DVDRelease Audio Standby Press and hold Audio ON. Standby on Press CDManufactures’ codes for Catv converter Manufacturer Codes Manufactures’ codes for DBS tuner Manufacturer CodesManufactures’ codes for VCR Manufacturer CodesTo store the signals Storing the Remote Signals ManuallySet the LEARN/TRANSMIT Zone 1/ZONE 2 selector toFor the Zone 1 operations ControlTo use the stored signals To erase the stored signalsPress the desired button Problem Possible Cause Solution TroubleshootingMulti-room operations Zone1/Zone Surround/THXGeneral FM/AMPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.02% total Harmonic distortionFM tuner IHF VideoAM tuner GeneralLimited Warranty Authorized Service Centers RX-DP20VBK AUDIO/VIDEO Control Receiver

RX-DP20VBKC specifications

The JVC RX-DP20VBKC is a versatile and high-performance audio receiver designed to enhance the home entertainment experience. It combines advanced technology with user-friendly features, making it an excellent choice for music enthusiasts and movie lovers alike.

One of the standout features of the RX-DP20VBKC is its powerful amplification system. With a robust output power of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, providing rich and dynamic sound quality across various genres of music. The receiver supports a variety of audio formats, ensuring compatibility with different media sources.

The RX-DP20VBKC is equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones, tablets, or other Bluetooth-enabled devices. This convenience eliminates the need for tangled cables and enhances the overall user experience. Additionally, the receiver features USB inputs, enabling direct playback from USB flash drives, and a built-in FM/AM tuner for accessing radio stations.

Another key characteristic of this model is its multi-room capability. Users can enjoy music in multiple rooms by connecting additional compatible speakers. The receiver supports various speaker configurations, making it adaptable for larger spaces or different setups.

In terms of sound processing, the RX-DP20VBKC includes several advanced audio technologies. It boasts a built-in digital signal processor that enhances sound clarity and spatial dynamics. Users can choose from various sound presets or customize their listening experience with adjustable equalizer settings. This flexibility allows for tailored sound quality that suits individual preferences.

The design of the RX-DP20VBKC is sleek and modern, featuring an intuitive front panel with easy-to-read displays and controls. The remote control enhances usability, giving users the ability to manage playback settings from a distance.

In summary, the JVC RX-DP20VBKC is a formidable audio receiver that combines power, versatility, and modern connectivity options, making it an ideal centerpiece for any home audio system. With its impressive amplification, wireless streaming capabilities, and advanced sound processing technologies, it caters to the diverse needs of today’s audio consumers.
Top Page Image Contents