JVC RX-DP20VBKC manual Basic Settings, Setup Menu Configuration

Basic Settings

Some of the following settings are required after connecting and positioning your speakers, while others will make operations easier.

Basic setting operations are only possible while the receiver is ready for Zone 1 operations.

Setup Menu Configuration

SETUP MENU (1)

SETUP MENU (2)

1 SPEAKER SETTING		SETUP MENU (2)
			8 DUAL MONO
	(See page 38.)			(See page 42.)

9 DIGITAL IN/OUT (See page 42.)

2 CHANNEL LEVEL (See page 38.)

SETUP MENU (1)

p VIDEO INPUT (See page 43.)

3 SPEAKER DISTANCE (See page 40.)

	q VIDEO POWER
	(See page 43.)
4 SUBWOOFER	w ZONE 2/SPEAKER 2
	(See page 43.)
(See page 40.)
	e SUPERIMPOSE
	(See page 44.)
5 THX AUDIO SETUP
(See page 41.)
	r FL DISPLAY
	(See page 44.)

t ONE TOUCH OPE

6 SURR CH OUT(See page 44.) (See page 42.)

7 AUDIO DELAY (See page 42.)

Note:

When performing the basic settings viewing the indications on the main unit’s display, the indications are slightly different from what are shown on the on-screen display.

This is because of the limited number of characters shown on the main unit’s display.

Ex. • “SPEAKER SETTING” is shown as “SP SETTING” on the main unit’s display.

•“SPEAKER DISTANCE” is shown as “SP DISTANCE” on the main unit’s display.

NOTICE—

•Items on the menus shown above are all set to the initial values when shipped from the factory.

*However, the SPEAKER DISTANCE, SUBWOOFER, and THX AUDIO SETUP submenu settings are not the initial ones. They are the settings when “SUBWOOFER” is set to “YES” on the SPEAKER SETTING submenu.

•Some of the menus or some items on the menu cannot be shown or cannot be adjusted. (For details, see the respective explanations in this section.)

35