JVC RX-DP20VBKC manual Receiving Radio Broadcasts, Tuning in to Stations Manually, Press FM/AM

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

Indicates the functions YOU CAN ALSO USE when the receiver is ready for Zone 2 operations.

IMPORTANT:

Check the following before or while using the buttons and controls.

Tuning in to Stations Manually

1. Press FM/AM.

The last received station of the last selected band is tuned in.

•Each time you press the button, the band alternates between FM and AM.

For Zone 1 operations:

The ZONE 1 ON/OFF lamp on the unit is lit .

For Zone 2 operations:

The ZONE 2 ON/OFF lamp on the unit is lit.

FM/AM

On the unit

FM/AM

From the remote control

• When using the unit:

– For the Zone 1 operations: “ZONE 2” is not shown in the main

display.

– For the Zone 2 operations: “ZONE 2” is shown in the main

display.	DOOR
– Press DOOR DOWN to use the buttons inside the
	DOWN
front door.
To close the front door, press DOOR UP.

•When using the remote control:

When operating the receiver using the remote control, the display on the unit always shows the Zone 1 source information though you are operating it for the Zone 2 source.

–Set the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector to “ZONE 1” or “ZONE 2” correctly.

–Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode together with multi-room operation mode (either ZONE 1 or ZONE 2) for a while.

	LEARN	TRANSMIT			LEARN	TRANSMIT
ZONE 1		ZONE 2		ZONE 1		ZONE 2
LEARN TRANSMIT				LEARN TRANSMIT
		STANDBY	ON			STANDBY	ON
ZONE 1	ZONE 2			ZONE 1	ZONE 2
ZONE 1	ZONE 2	TV/CATV/DBS	VCR 1	ZONE 1	ZONE 2	TV/CATV/DBS	VCR 1
ON/OFF	ON/OFF			ON/OFF	ON/OFF
		STANDBY/ON	STANDBY/ON			STANDBY/ON	STANDBY/ON
ZONE 1					ZONE 2

Ex. When you press FM/AM	Ex. When you press FM/AM
with ZONE 1/ZONE 2	with ZONE 1/ZONE 2
(LEARN/TRANSMIT)	(LEARN/TRANSMIT)
selector set to “ZONE 1.”	selector set to “ZONE 2.”

(inside the front door)

When operating for Zone 1

ANALOG		AUTO MUTING
L	R	SPEAKERS 1
SUBWFR		VOLUME

dB

When operating for Zone 2

AUTO MUTING

SPEAKERS 1 ZONE 2

VOLUME

dB

2.Press TUNING 5 / ∞ (inside the front door) or TUNING UP/DOWN until you find the frequency you want.

DOWN	UP	/ REW	PLAY	FF/
/ TUNING	/ TUNING
		DOWN	TUNING	UP

On the unit

From the remote control

(inside the front door)

Notes:

•When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.

•When an FM stereo program is received, the STEREO indicator also lights up.

•When you hold the button (and release it) in step 2, the frequency keeps changing until a station is tuned in.

•You can only select the same station of the same band (FM or AM) for both Zone 1 and Zone 2 operations. If you change the station for Zone 2, it also changes for Zone 1 (and vice versa: indications in the main display also change). This also means that if you change the station for Zone 2 while recording a broadcasting program in Zone 1, recording in Zone 1 will be interrupted.

33