JVC RX-DP20VBKC manual Troubleshooting, Multi-room operations Zone1/Zone, Surround/THX

Page 84

Troubleshooting

Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center.

Multi-room operations (Zone1/Zone 2)

PROBLEM

 

POSSIBLE CAUSE

SOLUTION

The buttons and controls on the front

 

The multi-room function is not set

• Press ZONE 1 ON/OFF for Zone 1

panel do not work.

 

correctly.

operations.

 

 

 

• Press ZONE 2 ON/OFF and ZONE 2

 

 

 

CONTROL for Zone 2 operations.

 

 

 

 

No sound from the speakers in Zone 1.

 

Speaker signal cables are not connected

Check speaker wiring and reconnect if

 

 

properly.

necessary. (See pages 8 to 10.)

 

 

 

 

 

 

The SPEAKERS 1 and SPEAKERS 2

Press SPEAKERS 1 and SPEAKERS 2

 

 

buttons are not set correctly.

correctly. (See page 25.)

 

 

 

 

 

 

Incorrect source is selected for the Zone 1.

Select the correct source for the Zone 1.

 

 

 

 

 

 

Muting is activated for the Zone 1 source.

Press MUTING to cancel the mute.

 

 

 

(See page 26.)

 

 

 

 

 

 

Incorrect input mode (analog or digital) is

Select the correct input mode (analog or

 

 

selected.

digital). (See page 25.)

 

 

 

 

 

 

Connections are incorrect.

Check connections.

 

 

 

For analog connections, see pages 11 to 15.

 

 

 

For digital connections, see pages 12 and 16.

 

 

 

 

No sound from the front speakers in

 

Speaker signal cables are not connected

Check speaker connection and reconnect if

Zone 2.

 

properly.

necessary. (See page 19.)

 

 

 

 

 

 

Zone 1/2 setting for the speakers connected

Set the Zone 1/2 setting for the speakers

 

 

to the FRONT 2/ZONE 2 SPEAKERS

correctly to use them as the Zone 2 front

 

 

terminals are not set correctly.

speakers. (See page 44.)

 

 

 

 

 

 

Amplifier connected to the ZONE 2

Turn on the amplifier.

 

 

PREOUT is not turned on.

 

 

 

 

 

 

 

Incorrect source is selected for Zone 2.

Select the correct Zone 2 source.

 

 

 

 

 

 

Muting is activated for the Zone 2 source.

Press MUTING to cancel the mute.

 

 

 

(See page 32.)

 

 

 

 

 

 

Connections are incorrect.

Make analog connections for Zone 2.

 

 

 

For analog connections, see pages 11 to 15.

 

 

 

 

The ZONE 2 (SPEAKERS 2) button

 

The speakers connected to the FRONT 2/

Set them for Zone 2 usage. (See page 44.)

does not work.

 

ZONE 2 SPEAKERS are preset for Zone 1

 

 

 

usage.

 

 

 

 

 

CD tracks are skipped, tape is rewound,

 

When the same source is selected both for

This is normal, not a malfunction of the unit.

or radio station is changed

 

Zone 1 and Zone 2, the source in one zone

Selecting different sources for Zone 1 and

unintentionally.

 

affects the source in the other zone.

Zone 2 will avoid these troubles.

 

 

 

 

The receiver does not work correctly as

 

Zone 1 and Zone 2 operations are done at

If this happens, perform the same operation

you operate it.

 

the same time.

again.

 

 

 

 

“TURN ON ZONE1 OR ZONE2”

 

The receiver is turned on with the Zone 1

• Press ZONE 1 ON/OFF for Zone 1

appears on the display.

 

and Zone 2 sounds deactivated.

operations.

 

 

 

• Press ZONE 2 ON/OFF for Zone 2

 

 

 

operations.

Surround/THX

“EXES7.1 OFF” appears on the display,

The “SPEAKER 2” setting is set to “ZONE

To use the 7.1-channel reproduction mode, set

and 7.1-channel reproduction mode

2 SPK” (and activated) on the ZONE 2/

the “SPEAKER 2” setting to “SPEAKER 2,”

cannot be used for Zone 1 sources.

SPEAKER 2 submenu.

then activate the surround back speaker(s).

 

 

 

“NO SURRBACK” appears on the

The “SPEAKER 2” setting is set to

To use the 7.1-channel reproduction mode, set

display when you have tried to use 7.1-

“BI-AMP OUT” on the ZONE 2/

the “SPEAKER 2” setting to “SPEAKER 2,”

channel reproduction mode.

SPEAKER 2 submenu.

then activate the surround back speaker(s).

 

 

 

 

The “SURR BACK SP” setting is set to

Select “LARGE” or “SMALL” for the

 

“NONE.”

“SURR BACK SP.”

 

 

 

7.1-channel reproduction mode cannot

The speakers connected to the FRONT 2/

Deactivate the Zone 2 front speakers, then

be used for Zone 1 sources.

ZONE 2 SPEAKERS terminals are

activate the surround back speakers.

 

activated.

 

 

 

 

Expected surround effect cannot be

Speakers are deactivated on the SPEAKER

Activate all connected speakers correctly.

obtained.

SETTING submenu.

(See “How to use the speaker and signal

 

 

indicators” on page 24.)

81

Page 83 Page 85
Image 84
Page 83 Page 85
Contents RX-DP20VBK LVT0965-001AJ23.5 kg / 52.0 lb For the main unit Features Precautions IntroductionTable of Contents Parts Identification Front PanelDisplay Window To open the front doorDual indicator Analog indicatorDgtl Auto indicator 96/24 indicatorQ w e r t Rear PanelRemote Control Before Installation Checking the Supplied AccessoriesConnecting the FM and AM Antennas Getting StartedConnecting the Speakers Basic connecting procedureAM Antenna Connections Turn the loop until you have the best receptionZone 1 speaker layout Front speakers and center speakerSurround and surround back speakers Connecting a subwoofer Enhance your audio systemAbout the Front 2/ZONE 2 Speakers terminals Connecting Audio/Video Components Analog ConnectionsWhen attaching the front Terminal cover When using the digital input terminalExternal 7.1-channel Output component Video cameraVCRs VHS/S-VHS/VHS F G VCRTV and/or DBS tuner DBS tunerWhen you connect the DVD player with stereo output jacks DVD playerDVD player Digital Connections Digital output terminalDigital input terminals Using the RF Rod Antenna and IR Signal Transmitter Find a place where you can attach the IR signal transmitterSetting Up the RF Rod Antenna Setting Up the IR Signal TransmitterPutting Batteries in the Remote Control Connecting the Power CordWhen using the remote control in the dark Replace the coverPower amplifier Multi-Room OperationsRequired Connections for Zone Connection Å Connection ıBasic Operating Procedure for Zone Turn Master Volume to Press Zone 2 ON/OFF so thatZone 2 ON/OFF lamp lights up Press Zone 2 Control so that ControlTurning the Power On and Off Standby To turn on the power, pressTo turn off the power into standby mode Zone 1 Main Room OperationsCanceling the Zone 1 Operations Speaker and signal indicators on the displaySelecting the Zone 1 Source to Play Press one of the source selecting buttonsAdjusting the Zone 1 Volume Selecting different sources for picture and soundSelecting the Analog or Digital Input Mode Activating the Zone 1 Front SpeakersMode Attenuating the Input Signal Muting the Zone 1 SoundAnalog Changing the Display Brightness Making Sounds NaturalTurning Analog Direct On and Off Changing the Source NameUsing the Sleep Timer Basic adjustment auto memoryPress Sleep repeatedly Recording a SourceLast Zone Zone 2 volume Source appears Zone 2 Sub-room OperationsPress Zone 2 Control inside Front door so that ZoneCanceling the Zone 2 Operations Zone 2 Speakers terminal, see also w Setting the ZoneTo stop Zone 2 operations and sounds through To use this receiver for Zone 2 operationsAdjusting the Zone 2 Volume Selecting the Zone 2 Source to PlayDVD DownActivating the Zone 2 Front Speakers Front speakersMuting the Zone 2 Sound To deactivate the Zone 2 front speakers, press Zone 2 againTuning in to Stations Manually Ex. When you press FM/AM With Zone 1/ZONEReceiving Radio Broadcasts Press FM/AMUsing Preset Tuning Selecting the FM Reception ModeBasic Settings Setup Menu ConfigurationOperation through On-Screen Display Menus Menu operation buttonsButton To do Menu Operating Procedure Press Setup MenuPress SET Setting the Speakers-SPEAKER Setting Adjusting the Speaker Channel Output Levels-CHANNEL LevelYES 1SPKAuto OFFFront L Level Front R LevelSetting the Speaker Distance Setting the Bass Sounds-SUBWOOFERFor each speaker LFESetting the THX Audio-THX Audio Setup ApartClose Setting the Surround Channel Output Speakers-SURR CH OUT Setting the Audio Delay Level-AUDIO DelaySetting the Digital Input/Output Terminals Selecting the Dual Mono Sound-DUAL MonoSetting the Video Input Terminals Setting the Zone 2/Speakers 2 UsageTurning On and Off the Video Output PCMMemorizing the Volume Level for Each Source-ONE Touch OPE Superimposing the Menus-SUPERIMPOSEShowing the Text Information on the Display-FL Display TextSound Adjustments Adjustment Menu ConfigurationAdjust Menu Midnight ModeDisplay or erase the Adjustment Menu Select a submenu on the Adjustment MenuOr an item on a submenu downwards or Press Adjust Menu Ex.When adjusting the DSP effectsSet other items on the same submenu if necessary Same submenu Press # or @ Right or Left to setAdjustment procedure Submenu itemsBass MIDSetting the Midnight Mode-MIDNIGHT Mode Adjusting the Various EffectsWhen one of the DSP modes except ALL CH Stereo is activated When Dolby Pro Logic II Music is activated When Neo6 Music is activatedPress Liveness repeatedly to adjust Overall level of the effect 1 toUsing the Surround and THX Modes Reproducing Theater AmbienceIntroducing the Surround and THX Modes Dolby Digital EX Dolby Pro LogicDTS Digital Surround DTS Extended Surround DTS-ESSurround and THX Modes Applicable to the Various Software ZoneES/EX/7.1 Available Incoming Signal Type 2-channel Available Surround Mode Available THX ModeActivating the Surround and THX Modes About Dialog NormalizationActivating the 7.1-channel reproduction EXES7.1 onPress Surround to activate the Surround Mode To cancel the Surround modeEx. When Dolby Digital is activated To adjust the speaker output level using the remote controlPress THX to activate the THX mode To cancel the THX mode without canceling the Surround modeTo cancel the THX and Surround modes 3D Headphone ModeUsing the DSP Modes Headphone ModeReproducing the Sound Field Introducing the DSP ModesTo adjust the DSP effects To cancel the DSP modesPress Effect repeatedly to adjust the level Activating the DSP ModesUsing the Analog Multi-channel Playback Mode Activating the Analog Multi-channelPlayback Modes Compu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverMD recorder CD recorderAutomatic Power Off Standby When you turn off the Zone 1 sound by pressingWhen you turn off the Zone 2 source by pressing At the same timeText Compu Link Remote Control System RX-DP20VBKDisplaying the Disc Information on the TV screen Disc Search Only for CD PlayerPress Text Display while CD or MD is selected as the source Disc Information screenTo exit from the Disc information screen Zone 2 LearnPress Text Display while CD is selected as the source Press % / fi to move to SEARCH, then pressPress % / fi to move to Performer Then press SET Press SET againPress % / fi to move to SEARCH, then press SET Press % / fi to move To GENRE, then Press SETPress % / fi to move to Title INPUT, then press SET Entering the Disc InformationEnter the disc title, referring to steps 3 Press % / fi to move to the genre you want, then press SETPress Text Display while MD is selected as the source Press % / fi to move to Title Input Then press SETAV Compu Link Remote Control System Connections 1 IR Signal Transmitter ConnectionIR signal transmitter Connections 2 AV Compu Link ConnectionConnections 3 Video Cable Connection CaseOne-Touch Video Play Automatic Power On/Off Standby Automatic Power OnWhen you turn off the Zone 2 sound by pressing One-Touch DVD PlayOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD player CD player-changerTurntable CD recorderOperating Video Components VCR VCR connected to the VCR 1 jacks¶ REC DVD playerChanging the Preset Signal Codes Operating Other Manufacturers’ EquipmentEnter a manufacturer’s code using Press and hold VCRPress VCR Buttons 1-9,Press and hold Audio Standby Press DVD Release Audio onRelease Audio Standby Press and hold Audio ON. Standby on Press CDManufactures’ codes for DBS tuner Manufacturer Codes Manufactures’ codes for Catv converter Manufacturer CodesManufactures’ codes for VCR Manufacturer CodesStoring the Remote Signals Manually To store the signalsSet the LEARN/TRANSMIT Zone 1/ZONE 2 selector toControl For the Zone 1 operationsTo use the stored signals To erase the stored signalsPress the desired button Troubleshooting Problem Possible Cause SolutionMulti-room operations Zone1/Zone Surround/THXFM/AM GeneralSpecifications Per channel, min. RMS, driven into 8 ΩHz to 20 kHz with no more than 0.02% total Harmonic distortionVideo FM tuner IHFAM tuner GeneralLimited Warranty Authorized Service Centers RX-DP20VBK AUDIO/VIDEO Control Receiver

RX-DP20VBKC specifications

The JVC RX-DP20VBKC is a versatile and high-performance audio receiver designed to enhance the home entertainment experience. It combines advanced technology with user-friendly features, making it an excellent choice for music enthusiasts and movie lovers alike.

One of the standout features of the RX-DP20VBKC is its powerful amplification system. With a robust output power of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, providing rich and dynamic sound quality across various genres of music. The receiver supports a variety of audio formats, ensuring compatibility with different media sources.

The RX-DP20VBKC is equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones, tablets, or other Bluetooth-enabled devices. This convenience eliminates the need for tangled cables and enhances the overall user experience. Additionally, the receiver features USB inputs, enabling direct playback from USB flash drives, and a built-in FM/AM tuner for accessing radio stations.

Another key characteristic of this model is its multi-room capability. Users can enjoy music in multiple rooms by connecting additional compatible speakers. The receiver supports various speaker configurations, making it adaptable for larger spaces or different setups.

In terms of sound processing, the RX-DP20VBKC includes several advanced audio technologies. It boasts a built-in digital signal processor that enhances sound clarity and spatial dynamics. Users can choose from various sound presets or customize their listening experience with adjustable equalizer settings. This flexibility allows for tailored sound quality that suits individual preferences.

The design of the RX-DP20VBKC is sleek and modern, featuring an intuitive front panel with easy-to-read displays and controls. The remote control enhances usability, giving users the ability to manage playback settings from a distance.

In summary, the JVC RX-DP20VBKC is a formidable audio receiver that combines power, versatility, and modern connectivity options, making it an ideal centerpiece for any home audio system. With its impressive amplification, wireless streaming capabilities, and advanced sound processing technologies, it caters to the diverse needs of today’s audio consumers.
Top Page Image Contents