JVC RX-DP20VBKC manual Selecting the Zone 2 Source to Play, Adjusting the Zone 2 Volume, Dvd, Down

Selecting the Zone 2 Source to Play

Press one of the source selecting buttons.

DVD DVD MULTI VCR 1 VCR 2 TV/DBS VIDEO CD PHONO TAPE/MD CDR FM/AM EXT 7.1CH

On the unit

			SPEAKERS 1 ZONE 2
			VOLUME
			dB
Selected source name			The Zone 2 volume
			level appears.
DVD	DVD MULTI	PHONO	CD
VCR 1	VCR 2	TAPE/MD	CDR
TV/DBS	VIDEO	FM/AM	EXT 7.1CH

Selecting different sources for picture and sound

While watching pictures from a video source (DVD player, VCR, or DBS tuner), you can listen to sound of an audio source.

•Once you have selected a video source, pictures of the selected source are sent to the TV until you select another video source.

Press one of the audio source selecting buttons— PHONO, CD, TAPE/MD, CDR, FM/AM—while viewing the picture from a video component such as the VCR or DVD player, etc.

DVD DVD MULTI VCR 1 VCR 2 TV/DBS VIDEO CD PHONO TAPE/MD CDR FM/AM EXT 7.1CH

On the unit

DVD	DVD MULTI	PHONO	CD
VCR 1	VCR 2	TAPE/MD	CDR
TV/DBS	VIDEO	FM/AM	EXT 7.1CH

From the remote control

From the remote control

Adjusting the Zone 2 Volume

DVD	: Selects the DVD player.
VCR 1	: Selects the video component connected to the
	VCR 1 IN jacks.
VCR 2	: Selects the video component connected to the
	VCR 2 IN jacks.
TV/DBS	: Selects the DBS tuner.
	• Does not work for selecting TV.
VIDEO	: Selects the video component connected to the
	VIDEO jacks.
CD*	: Selects the CD player.
PHONO*	: Selects the turntable.
TAPE/MD* : Selects the cassette deck (or the MD recorder).
CDR*	: Selects the CD recorder.
FM/AM*	: Selects the tuner.

Each time you press the button, the band alternates between FM and AM.

Notes:

•When you press one of the audio source selecting buttons on the remote control marked with an asterisk (*), the receiver automatically turns on. If you turn on the receiver with ZONE 1/ ZONE 2 (LEARN/TRANSMIT) selector set to “ZONE 1,” press ZONE 2 ON/OFF to activate Zone 2 operations.

–If you press one of the audio source selecting buttons on the remote control with the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector set to “ZONE 2” while the receiver is turned on but Zone 2 is turned off, Zone 2 is turned on with the audio source selected.

•You cannot select the following as a Zone 2 source:

–“TV,” “DVD MULTI,” and “EXT 7.1CH”

–Any digital input

You can only select the analog input as the Zone 2 source. (If analog connections have not been made, no sound comes out of the Zone 2 speakers.)

On the unit:		MASTER VOLUME
To increase the volume, turn MASTER
VOLUME clockwise.
To decrease the volume, turn it
counterclockwise.	Down	Up

•When you turn MASTER VOLUME rapidly, the volume level also changes rapidly.

•When you turn MASTER VOLUME slowly, the volume level also changes slowly.

From the remote control:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME –.	VOLUME

CAUTIONS:

•Always set the volume to the minimum before starting any source. If the volume is set at a high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.

•Be careful not to turn up the volume too high when controlling the receiver without listening to the playback sound. For example, when adjusting the volume level in Zone 2 from Zone 1.

Notes:

•The volume level can be adjusted within the range of “– – – dB” (minimum) “–71.0 dB” to “+18.0 dB” (maximum).

•With “ZONE2PREOUT” set to “VARIABLE” (see page 43), no sounds come out of the ZONE 2 PREOUT jacks if the volume level is set to “– – – dB.” In this case, increasing the volume level will enable the sound output through the ZONE 2 PREOUT jacks.

31