JVC RX-DP20VBKC Press the desired button, To use the stored signals, To erase the stored signals

Page 83

To use the stored signals

When you want to use the stored signals, follow the procedure below.

IMPORTANT:

To operate the other component(s) using this remote control—

•Aim directly at the remote sensor(s) on the target component(s).

–This remote control can send signals at a distance of 7 m (23 feet).

OR

•You can also use the IR signal transmitter connected to this receiver.

–Place the IR signal transmitter so that it is aimed at the remote sensor(s) on the target component(s).

You can operate the other component(s) through the remote sensor on this receiver.

When using the remote control:

–Set the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector to “ZONE 1” or “ZONE 2” properly.

1.Set the LEARN/TRANSMIT (ZONE 1/ZONE 2) selector to “TRANSMIT (ZONE 1/ZONE 2).”

LEARN

TRANSMIT

LEARN

TRANSMIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ZONE 1

 

ZONE 2

ZONE 1

 

ZONE 2

 

 

 

 

 

 

 

For the Zone 1 operations

For the Zone 2 operations

2.Press one of the source selecting buttons (or CONTROL repeatedly) to select the desired remote control operation mode (source).

DVD

DVD MULTI

PHONO

CD

VCR 1

VCR 2

TAPE/MD

CDR

TV/DBS

VIDEO

FM/AM

EXT 7.1CH

3. Press the desired button.

TV/CATV/DBS

VCR 1

/ REW

PLAY

FF/

STANDBY/ON

STANDBY/ON

DOWN

TUNING

UP

 

 

 

 

 

REC

STOP

PAUSE

TV/VIDEO

 

 

EFFECT

TV VOL CHANNEL

1

2

3

 

 

 

LIVENESS

 

4

5

6

 

7/P

8

9

 

 

 

 

SET

10

0

+10

 

RETURN

FM MODE

100+

DVD

 

 

 

MENU

Notes:

•To operate the TV, CATV tuner, or DBS tuner, set the TV operation mode selector correctly.

•To use the following buttons, you can skip step 2 above.

–TV/CATV/DBS (STANDBY/ON), VCR 1 (STANDBY/ ON), TV VOL +/–, TV/VIDEO, DVD MENU

•To use the following buttons, press DVD MENU first.

–SET, % / fi / @ / #

To erase the stored signals

After erasing the stored signals, preset signals are resumed and you can operate JVC’s components again.

1. Set the LEARN/TRANSMIT (ZONE 1/ LEARN TRANSMIT

ZONE 2) selector to “LEARN.”

ZONE 1 ZONE 2

2.Press and hold EXIT, then press one of the source selecting buttons from which you want to erase the stored signals.

 

 

DVD

DVD MULTI

PHONO

CD

EXIT

and

VCR 1

VCR 2

TAPE/MD

CDR

 

 

 

 

 

 

 

 

TV/DBS

VIDEO

FM/AM

EXT 7.1CH

LEARN

“CLEAR” appears on the display, and all the signals stored in the selected remote mode (source) are erased at the same time.

Notes:

•You cannot erase a signal assigned to a particular button only. Storing a new signal to a particular button erases the previously stored signal.

•To erase the stored signals for “CD DISC,” first press CONTROL to select “CD DISC,” then press CONTROL again while holding EXIT this time.

EXIT

\ and

3. Set the LEARN/TRANSMIT (ZONE 1/ZONE 2) selector to “TRANSMIT (ZONE 1/ZONE 2)” to finish the erasing procedure.

LEARN

TRANSMIT

LEARN

TRANSMIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ZONE 1

 

ZONE 2

ZONE 1

 

ZONE 2

 

 

 

 

 

 

 

For the Zone 1 operations

For the Zone 2 operations

80

Page 82 Page 84
Image 83
Page 82 Page 84
Contents LVT0965-001AJ RX-DP20VBK23.5 kg / 52.0 lb For the main unit Introduction Features PrecautionsTable of Contents To open the front door Parts IdentificationFront Panel Display Window96/24 indicator Dual indicatorAnalog indicator Dgtl Auto indicatorRear Panel Q w e r tRemote Control Getting Started Before InstallationChecking the Supplied Accessories Connecting the FM and AM AntennasTurn the loop until you have the best reception Connecting the SpeakersBasic connecting procedure AM Antenna ConnectionsSurround and surround back speakers Zone 1 speaker layoutFront speakers and center speaker About the Front 2/ZONE 2 Speakers terminals Connecting a subwooferEnhance your audio system Analog Connections Connecting Audio/Video ComponentsVideo camera When attaching the front Terminal coverWhen using the digital input terminal External 7.1-channel Output componentVHS/S-VHS/VHS F G VCR VCRsDBS tuner TV and/or DBS tunerDVD player When you connect the DVD player with stereo output jacksDVD player Digital input terminals Digital ConnectionsDigital output terminal Setting Up the IR Signal Transmitter Using the RF Rod Antenna and IR Signal TransmitterFind a place where you can attach the IR signal transmitter Setting Up the RF Rod AntennaReplace the cover Putting Batteries in the Remote ControlConnecting the Power Cord When using the remote control in the darkConnection Å Connection ı Power amplifierMulti-Room Operations Required Connections for ZoneBasic Operating Procedure for Zone Press Zone 2 Control so that Control Turn Master Volume toPress Zone 2 ON/OFF so that Zone 2 ON/OFF lamp lights upZone 1 Main Room Operations Turning the Power On and Off StandbyTo turn on the power, press To turn off the power into standby modePress one of the source selecting buttons Canceling the Zone 1 OperationsSpeaker and signal indicators on the display Selecting the Zone 1 Source to PlaySelecting different sources for picture and sound Adjusting the Zone 1 VolumeMode Selecting the Analog or Digital Input ModeActivating the Zone 1 Front Speakers Analog Attenuating the Input SignalMuting the Zone 1 Sound Changing the Source Name Changing the Display BrightnessMaking Sounds Natural Turning Analog Direct On and OffRecording a Source Using the Sleep TimerBasic adjustment auto memory Press Sleep repeatedlyFront door so that Zone Last Zone Zone 2 volume Source appearsZone 2 Sub-room Operations Press Zone 2 Control insideTo use this receiver for Zone 2 operations Canceling the Zone 2 OperationsZone 2 Speakers terminal, see also w Setting the Zone To stop Zone 2 operations and sounds throughDown Adjusting the Zone 2 VolumeSelecting the Zone 2 Source to Play DVDTo deactivate the Zone 2 front speakers, press Zone 2 again Activating the Zone 2 Front SpeakersFront speakers Muting the Zone 2 SoundPress FM/AM Tuning in to Stations ManuallyEx. When you press FM/AM With Zone 1/ZONE Receiving Radio BroadcastsSelecting the FM Reception Mode Using Preset TuningSetup Menu Configuration Basic SettingsButton To do Operation through On-Screen Display MenusMenu operation buttons Press SET Menu Operating ProcedurePress Setup Menu 1SPK Setting the Speakers-SPEAKER SettingAdjusting the Speaker Channel Output Levels-CHANNEL Level YESFront R Level AutoOFF Front L LevelLFE Setting the Speaker DistanceSetting the Bass Sounds-SUBWOOFER For each speakerClose Setting the THX Audio-THX Audio SetupApart Selecting the Dual Mono Sound-DUAL Mono Setting the Surround Channel Output Speakers-SURR CH OUTSetting the Audio Delay Level-AUDIO Delay Setting the Digital Input/Output TerminalsPCM Setting the Video Input TerminalsSetting the Zone 2/Speakers 2 Usage Turning On and Off the Video OutputText Memorizing the Volume Level for Each Source-ONE Touch OPESuperimposing the Menus-SUPERIMPOSE Showing the Text Information on the Display-FL DisplayMidnight Mode Sound AdjustmentsAdjustment Menu Configuration Adjust MenuOr an item on a submenu downwards or Display or erase the Adjustment MenuSelect a submenu on the Adjustment Menu Same submenu Press # or @ Right or Left to set Press Adjust MenuEx.When adjusting the DSP effects Set other items on the same submenu if necessaryMID Adjustment procedureSubmenu items BassWhen one of the DSP modes except ALL CH Stereo is activated Setting the Midnight Mode-MIDNIGHT ModeAdjusting the Various Effects Overall level of the effect 1 to When Dolby Pro Logic II Music is activatedWhen Neo6 Music is activated Press Liveness repeatedly to adjustIntroducing the Surround and THX Modes Using the Surround and THX ModesReproducing Theater Ambience DTS Extended Surround DTS-ES Dolby Digital EXDolby Pro Logic DTS Digital SurroundES/EX/7.1 Available Surround and THX Modes Applicable to the Various SoftwareZone Available THX Mode Incoming Signal Type 2-channel Available Surround ModeEXES7.1 on Activating the Surround and THX ModesAbout Dialog Normalization Activating the 7.1-channel reproductionTo adjust the speaker output level using the remote control Press Surround to activate the Surround ModeTo cancel the Surround mode Ex. When Dolby Digital is activated3D Headphone Mode Press THX to activate the THX modeTo cancel the THX mode without canceling the Surround mode To cancel the THX and Surround modesIntroducing the DSP Modes Using the DSP ModesHeadphone Mode Reproducing the Sound FieldActivating the DSP Modes To adjust the DSP effectsTo cancel the DSP modes Press Effect repeatedly to adjust the levelPlayback Modes Using the Analog Multi-channel Playback ModeActivating the Analog Multi-channel CD recorder Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver MD recorderAt the same time Automatic Power Off StandbyWhen you turn off the Zone 1 sound by pressing When you turn off the Zone 2 source by pressingDisc Search Only for CD Player Text Compu Link Remote Control SystemRX-DP20VBK Displaying the Disc Information on the TV screenZone 2 Learn Press Text Display while CD or MD is selected as the sourceDisc Information screen To exit from the Disc information screenPress SET again Press Text Display while CD is selected as the sourcePress % / fi to move to SEARCH, then press Press % / fi to move to Performer Then press SETEntering the Disc Information Press % / fi to move to SEARCH, then press SETPress % / fi to move To GENRE, then Press SET Press % / fi to move to Title INPUT, then press SETPress % / fi to move to Title Input Then press SET Enter the disc title, referring to steps 3Press % / fi to move to the genre you want, then press SET Press Text Display while MD is selected as the sourceConnections 2 AV Compu Link Connection AV Compu Link Remote Control SystemConnections 1 IR Signal Transmitter Connection IR signal transmitterOne-Touch Video Play Connections 3 Video Cable ConnectionCase One-Touch DVD Play Automatic Power On/Off StandbyAutomatic Power On When you turn off the Zone 2 sound by pressingSound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCD recorder CD playerCD player-changer TurntableDVD player Operating Video ComponentsVCR VCR connected to the VCR 1 jacks ¶ RECOperating Other Manufacturers’ Equipment Changing the Preset Signal CodesButtons 1-9, Enter a manufacturer’s code usingPress and hold VCR Press VCRPress and hold Audio ON. Standby on Press CD Press and hold Audio Standby Press DVDRelease Audio on Release Audio StandbyManufacturer Codes Manufactures’ codes for DBS tuner Manufacturer CodesManufactures’ codes for Catv converter Manufacturer Codes Manufactures’ codes for VCRZone 1/ZONE 2 selector to Storing the Remote Signals ManuallyTo store the signals Set the LEARN/TRANSMITFor the Zone 1 operations ControlPress the desired button To use the stored signalsTo erase the stored signals Surround/THX TroubleshootingProblem Possible Cause Solution Multi-room operations Zone1/ZoneGeneral FM/AMHarmonic distortion SpecificationsPer channel, min. RMS, driven into 8 Ω Hz to 20 kHz with no more than 0.02% totalGeneral VideoFM tuner IHF AM tunerLimited Warranty Authorized Service Centers RX-DP20VBK AUDIO/VIDEO Control Receiver

RX-DP20VBKC specifications

The JVC RX-DP20VBKC is a versatile and high-performance audio receiver designed to enhance the home entertainment experience. It combines advanced technology with user-friendly features, making it an excellent choice for music enthusiasts and movie lovers alike.

One of the standout features of the RX-DP20VBKC is its powerful amplification system. With a robust output power of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, providing rich and dynamic sound quality across various genres of music. The receiver supports a variety of audio formats, ensuring compatibility with different media sources.

The RX-DP20VBKC is equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones, tablets, or other Bluetooth-enabled devices. This convenience eliminates the need for tangled cables and enhances the overall user experience. Additionally, the receiver features USB inputs, enabling direct playback from USB flash drives, and a built-in FM/AM tuner for accessing radio stations.

Another key characteristic of this model is its multi-room capability. Users can enjoy music in multiple rooms by connecting additional compatible speakers. The receiver supports various speaker configurations, making it adaptable for larger spaces or different setups.

In terms of sound processing, the RX-DP20VBKC includes several advanced audio technologies. It boasts a built-in digital signal processor that enhances sound clarity and spatial dynamics. Users can choose from various sound presets or customize their listening experience with adjustable equalizer settings. This flexibility allows for tailored sound quality that suits individual preferences.

The design of the RX-DP20VBKC is sleek and modern, featuring an intuitive front panel with easy-to-read displays and controls. The remote control enhances usability, giving users the ability to manage playback settings from a distance.

In summary, the JVC RX-DP20VBKC is a formidable audio receiver that combines power, versatility, and modern connectivity options, making it an ideal centerpiece for any home audio system. With its impressive amplification, wireless streaming capabilities, and advanced sound processing technologies, it caters to the diverse needs of today’s audio consumers.
Top Page Image Contents