JVC RX-DP20VBKC Press Adjust Menu, Set other items on the same submenu if necessary, Operations

Page 50

Menu Operating Procedure

Ex.When adjusting the DSP effects

Operations

1.Press ADJUST MENU.

•Make sure one of the DSP modes except “ALL CH STEREO” is selected.

On the TV screen

ADJUST MENU appears.

On the main unit’s display

SPEAKERS 1

VOLUME

dB

The submenu names previously selected appears.

2.Press fi or % (DOWN or UP) repeatedly to select the desired submenu.

Move

to “EFFECT ADJUST.” Press the button until “EFFECT ADJ”

 

 

 

 

appears.

 

 

 

 

 

•In this example, select “EFFECT ADJUST” submenu.

SPEAKERS 1

VOLUME

dB

3. Press SET.

SPEAKERS 1

VOLUME

dB

 

 

 

 

The first item on the selected submenu

 

 

 

 

 

 

 

 

appears (with the current setting shown

The selected submenu appears.

on the lower line of the main display).

 

4.Set a desired item on the submenu. 1 Press fi or % (DOWN or UP)

repeatedly to select an item.

2Press # or @ (RIGHT or LEFT) to set

the item.

•In this example, set “ROOM SIZE” to “5.”

SPEAKERS 1

VOLUME

dB

5.Set other items on the same submenu if necessary.

1 Press fi or % (DOWN or UP) repeatedly to select another item on

the same submenu.

2Press # or @ (RIGHT or LEFT) to set

the item.

•In this example, set “LIVENESS” to “5.”

SPEAKERS 1

VOLUME

dB

To return to the previous screens

To erase the menu (to return to the regular screen)

Press EXIT.

Press ADJUST MENU.

Each time you press the button, the on-screen display menu returns

 

to the one previously displayed. (On the main unit’s display, the

 

indications also change accordingly.)

 

47

Page 49 Page 51
Image 50
Page 49 Page 51
Contents RX-DP20VBK LVT0965-001AJ23.5 kg / 52.0 lb For the main unit Features Precautions IntroductionTable of Contents Display Window Parts IdentificationFront Panel To open the front doorDgtl Auto indicator Dual indicatorAnalog indicator 96/24 indicatorQ w e r t Rear PanelRemote Control Connecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Getting StartedAM Antenna Connections Connecting the SpeakersBasic connecting procedure Turn the loop until you have the best receptionSurround and surround back speakers Zone 1 speaker layoutFront speakers and center speaker About the Front 2/ZONE 2 Speakers terminals Connecting a subwooferEnhance your audio system Connecting Audio/Video Components Analog ConnectionsExternal 7.1-channel Output component When attaching the front Terminal coverWhen using the digital input terminal Video cameraVCRs VHS/S-VHS/VHS F G VCRTV and/or DBS tuner DBS tunerDVD player When you connect the DVD player with stereo output jacksDVD player Digital input terminals Digital ConnectionsDigital output terminal Setting Up the RF Rod Antenna Using the RF Rod Antenna and IR Signal TransmitterFind a place where you can attach the IR signal transmitter Setting Up the IR Signal TransmitterWhen using the remote control in the dark Putting Batteries in the Remote ControlConnecting the Power Cord Replace the coverRequired Connections for Zone Power amplifierMulti-Room Operations Connection Å Connection ıBasic Operating Procedure for Zone Zone 2 ON/OFF lamp lights up Turn Master Volume toPress Zone 2 ON/OFF so that Press Zone 2 Control so that ControlTo turn off the power into standby mode Turning the Power On and Off StandbyTo turn on the power, press Zone 1 Main Room OperationsSelecting the Zone 1 Source to Play Canceling the Zone 1 OperationsSpeaker and signal indicators on the display Press one of the source selecting buttonsAdjusting the Zone 1 Volume Selecting different sources for picture and soundMode Selecting the Analog or Digital Input ModeActivating the Zone 1 Front Speakers Analog Attenuating the Input SignalMuting the Zone 1 Sound Turning Analog Direct On and Off Changing the Display BrightnessMaking Sounds Natural Changing the Source NamePress Sleep repeatedly Using the Sleep TimerBasic adjustment auto memory Recording a SourcePress Zone 2 Control inside Last Zone Zone 2 volume Source appearsZone 2 Sub-room Operations Front door so that ZoneTo stop Zone 2 operations and sounds through Canceling the Zone 2 OperationsZone 2 Speakers terminal, see also w Setting the Zone To use this receiver for Zone 2 operationsDVD Adjusting the Zone 2 VolumeSelecting the Zone 2 Source to Play DownMuting the Zone 2 Sound Activating the Zone 2 Front SpeakersFront speakers To deactivate the Zone 2 front speakers, press Zone 2 againReceiving Radio Broadcasts Tuning in to Stations ManuallyEx. When you press FM/AM With Zone 1/ZONE Press FM/AMUsing Preset Tuning Selecting the FM Reception ModeBasic Settings Setup Menu ConfigurationButton To do Operation through On-Screen Display MenusMenu operation buttons Press SET Menu Operating ProcedurePress Setup Menu YES Setting the Speakers-SPEAKER SettingAdjusting the Speaker Channel Output Levels-CHANNEL Level 1SPKFront L Level AutoOFF Front R LevelFor each speaker Setting the Speaker DistanceSetting the Bass Sounds-SUBWOOFER LFEClose Setting the THX Audio-THX Audio SetupApart Setting the Digital Input/Output Terminals Setting the Surround Channel Output Speakers-SURR CH OUTSetting the Audio Delay Level-AUDIO Delay Selecting the Dual Mono Sound-DUAL MonoTurning On and Off the Video Output Setting the Video Input TerminalsSetting the Zone 2/Speakers 2 Usage PCMShowing the Text Information on the Display-FL Display Memorizing the Volume Level for Each Source-ONE Touch OPESuperimposing the Menus-SUPERIMPOSE TextAdjust Menu Sound AdjustmentsAdjustment Menu Configuration Midnight ModeOr an item on a submenu downwards or Display or erase the Adjustment MenuSelect a submenu on the Adjustment Menu Set other items on the same submenu if necessary Press Adjust MenuEx.When adjusting the DSP effects Same submenu Press # or @ Right or Left to setBass Adjustment procedureSubmenu items MIDWhen one of the DSP modes except ALL CH Stereo is activated Setting the Midnight Mode-MIDNIGHT ModeAdjusting the Various Effects Press Liveness repeatedly to adjust When Dolby Pro Logic II Music is activatedWhen Neo6 Music is activated Overall level of the effect 1 toIntroducing the Surround and THX Modes Using the Surround and THX ModesReproducing Theater Ambience DTS Digital Surround Dolby Digital EXDolby Pro Logic DTS Extended Surround DTS-ESES/EX/7.1 Available Surround and THX Modes Applicable to the Various SoftwareZone Incoming Signal Type 2-channel Available Surround Mode Available THX ModeActivating the 7.1-channel reproduction Activating the Surround and THX ModesAbout Dialog Normalization EXES7.1 onEx. When Dolby Digital is activated Press Surround to activate the Surround ModeTo cancel the Surround mode To adjust the speaker output level using the remote controlTo cancel the THX and Surround modes Press THX to activate the THX modeTo cancel the THX mode without canceling the Surround mode 3D Headphone ModeReproducing the Sound Field Using the DSP ModesHeadphone Mode Introducing the DSP ModesPress Effect repeatedly to adjust the level To adjust the DSP effectsTo cancel the DSP modes Activating the DSP ModesPlayback Modes Using the Analog Multi-channel Playback ModeActivating the Analog Multi-channel MD recorder Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver CD recorderWhen you turn off the Zone 2 source by pressing Automatic Power Off StandbyWhen you turn off the Zone 1 sound by pressing At the same timeDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemRX-DP20VBK Disc Search Only for CD PlayerTo exit from the Disc information screen Press Text Display while CD or MD is selected as the sourceDisc Information screen Zone 2 LearnPress % / fi to move to Performer Then press SET Press Text Display while CD is selected as the sourcePress % / fi to move to SEARCH, then press Press SET againPress % / fi to move to Title INPUT, then press SET Press % / fi to move to SEARCH, then press SETPress % / fi to move To GENRE, then Press SET Entering the Disc InformationPress Text Display while MD is selected as the source Enter the disc title, referring to steps 3Press % / fi to move to the genre you want, then press SET Press % / fi to move to Title Input Then press SETIR signal transmitter AV Compu Link Remote Control SystemConnections 1 IR Signal Transmitter Connection Connections 2 AV Compu Link ConnectionOne-Touch Video Play Connections 3 Video Cable ConnectionCase When you turn off the Zone 2 sound by pressing Automatic Power On/Off StandbyAutomatic Power On One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierTurntable CD playerCD player-changer CD recorder¶ REC Operating Video ComponentsVCR VCR connected to the VCR 1 jacks DVD playerChanging the Preset Signal Codes Operating Other Manufacturers’ EquipmentPress VCR Enter a manufacturer’s code usingPress and hold VCR Buttons 1-9,Release Audio Standby Press and hold Audio Standby Press DVDRelease Audio on Press and hold Audio ON. Standby on Press CDManufactures’ codes for VCR Manufactures’ codes for DBS tuner Manufacturer CodesManufactures’ codes for Catv converter Manufacturer Codes Manufacturer CodesSet the LEARN/TRANSMIT Storing the Remote Signals ManuallyTo store the signals Zone 1/ZONE 2 selector toControl For the Zone 1 operationsPress the desired button To use the stored signalsTo erase the stored signals Multi-room operations Zone1/Zone TroubleshootingProblem Possible Cause Solution Surround/THXFM/AM GeneralHz to 20 kHz with no more than 0.02% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionAM tuner VideoFM tuner IHF GeneralLimited Warranty Authorized Service Centers RX-DP20VBK AUDIO/VIDEO Control Receiver

RX-DP20VBKC specifications

The JVC RX-DP20VBKC is a versatile and high-performance audio receiver designed to enhance the home entertainment experience. It combines advanced technology with user-friendly features, making it an excellent choice for music enthusiasts and movie lovers alike.

One of the standout features of the RX-DP20VBKC is its powerful amplification system. With a robust output power of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, providing rich and dynamic sound quality across various genres of music. The receiver supports a variety of audio formats, ensuring compatibility with different media sources.

The RX-DP20VBKC is equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones, tablets, or other Bluetooth-enabled devices. This convenience eliminates the need for tangled cables and enhances the overall user experience. Additionally, the receiver features USB inputs, enabling direct playback from USB flash drives, and a built-in FM/AM tuner for accessing radio stations.

Another key characteristic of this model is its multi-room capability. Users can enjoy music in multiple rooms by connecting additional compatible speakers. The receiver supports various speaker configurations, making it adaptable for larger spaces or different setups.

In terms of sound processing, the RX-DP20VBKC includes several advanced audio technologies. It boasts a built-in digital signal processor that enhances sound clarity and spatial dynamics. Users can choose from various sound presets or customize their listening experience with adjustable equalizer settings. This flexibility allows for tailored sound quality that suits individual preferences.

The design of the RX-DP20VBKC is sleek and modern, featuring an intuitive front panel with easy-to-read displays and controls. The remote control enhances usability, giving users the ability to manage playback settings from a distance.

In summary, the JVC RX-DP20VBKC is a formidable audio receiver that combines power, versatility, and modern connectivity options, making it an ideal centerpiece for any home audio system. With its impressive amplification, wireless streaming capabilities, and advanced sound processing technologies, it caters to the diverse needs of today’s audio consumers.
Top Page Image Contents