JVC RX-DP20VBKC Operation through On-Screen Display Menus, Menu operation buttons, Button To do

IMPORTANT:

Check the following before or while using the buttons and controls.

For Zone 1 operations:

The ZONE 1 ON/OFF lamp on the unit is lit.

• When using the unit:	DOOR
– “ZONE 2” is not shown in the main display.
	DOWN
– Press DOOR DOWN to use the buttons inside the
front door.
To close the front door, press DOOR UP.

•When using the remote control:

–Set the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector to “ZONE 1.”

–Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode together with multi-room operation mode (either ZONE 1 or ZONE 2) for a while.

	LEARN TRANSMIT
		STANDBY	ON
	ZONE 1	ZONE 2
LEARN TRANSMIT	ZONE 1	ZONE 2 TV/CATV/DBS	VCR 1
	ON/OFF	ON/OFF
		STANDBY/ON	STANDBY/ON

Operation through On-Screen Display Menus

To do the basic settings for this receiver, you can utilize the on- screen display menus in order to finish important settings easily while viewing these menus.

Menu operation buttons

•When no operation is done for about 1 minute, the on-screen menu (as well as the indications in the unit’s main display) will disappear.

On the unit:

	DOWN	UP		SET
	/ TUNING∞	/ TUNING5		/ MEMORY
SETUP MENU	LEFT	RIGHT		EXIT
	/ PRESET∞	/ PRESET5		/ FM MODE
			(inside the front door)

ZONE 1 ZONE 2

ZONE 1

Ex. When you press SETUP MENU with

ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector set to “ZONE 1.”

The buttons for operating the menus are shown on the screen. You can operate the menu with these buttons.

Usable buttons

Usable buttons

Button	To do
SETUP MENU	display or erase the Setup Menu.
DOWN/UP	select a submenu on the Setup Menu or an
	item on a submenu (downwards or
	upwards).
SET	move to the selected submenu screen.
LEFT/RIGHT	select the desired setting on a submenu.
EXIT	exit from menu operations or return to the
	previous menu.
From the remote control:
SETUP
MENU
	SET
	EXIT
Button	To do
SETUP MENU	display or erase the Setup Menu.
fi / %	select a submenu on the Setup Menu or an
	item on a submenu (downwards or
	upwards).
SET	move to the selected submenu screen.
@ / #	select the desired setting on a submenu.
EXIT	exit from menu operations or return to the
	previous menu.

36