JVC RX-DP20VBKC manual Operating JVC’s Audio/Video Components, Operating Audio Components, Tuner

Page 74

Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC components are preset in the remote control.

Operating Audio Components

IMPORTANT:

To operate JVC’s audio components using this remote control:

•You need to connect JVC’s audio components through the COMPU LINK (SYNCHRO) jacks (see page 61) in addition to the connections using cables with RCA pin plugs (see page 11).

•Aim the remote control directly at the remote sensor on the receiver.

•To operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.

•To operate the cassette deck or MD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 27.)

•Refer also to the manuals supplied with your components.

When using the remote control:

–Set ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector to “ZONE 1” or “ZONE 2” correctly.

–Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode together with multi-room operation mode (either ZONE 1 or ZONE 2) for a while.

–The CONTROL button can change the remote control operation mode without changing the source.

Each time you press the button, the remote control operation mode changes in the sequence—VCR1 =TAPE = CDR =CD DISC = (back to the beginning).

 

LEARN

TRANSMIT

 

LEARN

TRANSMIT

 

 

 

 

 

ZONE 1

ZONE 2

ZONE 1

ZONE 2

 

 

 

 

LEARN TRANSMIT

 

 

LEARN TRANSMIT

 

 

 

 

STANDBY

ON

 

 

STANDBY

ON

 

 

 

 

 

 

ZONE 1

ZONE 2

 

 

ZONE 1

ZONE 2

 

 

ZONE 1

ZONE 2

TV/CATV/DBS

VCR 1

ZONE 1

ZONE 2

TV/CATV/DBS

VCR 1

ON/OFF

ON/OFF

 

 

ON/OFF

ON/OFF

 

 

 

 

 

 

 

 

 

 

STANDBY/ON

STANDBY/ON

 

 

STANDBY/ON

STANDBY/ON

ZONE 1

ZONE 2

Ex. When you press FM/AM

Ex. When you press FM/AM

with ZONE 1/ZONE 2

with ZONE 1/ZONE 2

(LEARN/TRANSMIT)

(LEARN/TRANSMIT)

selector set to “ZONE 1.”

selector set to “ZONE 2.”

 

 

Tuner

You can always perform the following operations:

FM/AM

: Tunes in to the last station of the last

 

selected band. Each time you press the

 

button, the band alternates between FM

 

and AM.

After pressing FM/AM, you can perform the following operations:

1 – 10, +10

: Selects a preset channel number directly.

 

For channel number 5, press 5.

 

For channel number 15, press +10, then 5.

 

For channel number 20, press +10, then 10.

TUNING UP/DOWN

: Tunes in to stations.

FM MODE

: Changes the FM reception mode.

Sound control section (Amplifier)

You can always perform the following operations:

THX

: Selects the THX modes.

SURROUND

: Selects the Surround modes

EX/ES/7.1

: Selects the 7.1-channel reproduction

 

modes.

DSP

: Selects the DSP modes.

SURR/DSP OFF

: Deactivates the THX/Surround/DSP

 

modes.

ANALOG DIRECT

: Turns on or off Analog Direct.

ANALOG/DIGITAL INPUT : Selects the analog/digital inputs.

CC CONVERTER

: Turns on or off CC Converter.

After pressing SOUND, you can perform the following operations:

TEST: Turns on or off the test tone output.

FRONT•L then LEVEL +/– : Adjusts the left front speaker channel output level.

FRONT•R then LEVEL +/– : Adjusts the right front speaker channel output level.

SUBWFR then LEVEL +/– : Adjusts the subwoofer output level.

CENTER then LEVEL +/– : Adjusts the center speaker channel output level.

SURR•L then LEVEL +/– : Adjusts the left surround speaker channel output level.

SURR•R then LEVEL +/– : Adjusts the right surround speaker channel output level.

SURR BK•L then LEVEL +/– : Adjusts the left surround back speaker channel output level.

SURR BK•R then LEVEL +/– : Adjusts the right surround back

 

channel speaker output level.

EFFECT

: Selects the effect level.

LIVENESS

: Selects the liveness.

Notes:

•After adjusting sounds, press the corresponding source selecting button to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.

•When you press LEVEL + or LEVEL –, the corresponding speaker name appears on the remote’s display.

71

Page 73 Page 75
Image 74
Page 73 Page 75
Contents RX-DP20VBK LVT0965-001AJ23.5 kg / 52.0 lb For the main unit Features Precautions IntroductionTable of Contents Display Window Parts IdentificationFront Panel To open the front doorDgtl Auto indicator Dual indicatorAnalog indicator 96/24 indicatorQ w e r t Rear PanelRemote Control Connecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Getting StartedAM Antenna Connections Connecting the SpeakersBasic connecting procedure Turn the loop until you have the best receptionSurround and surround back speakers Zone 1 speaker layoutFront speakers and center speaker About the Front 2/ZONE 2 Speakers terminals Connecting a subwooferEnhance your audio system Connecting Audio/Video Components Analog ConnectionsExternal 7.1-channel Output component When attaching the front Terminal coverWhen using the digital input terminal Video cameraVCRs VHS/S-VHS/VHS F G VCRTV and/or DBS tuner DBS tunerDVD player When you connect the DVD player with stereo output jacksDVD player Digital input terminals Digital ConnectionsDigital output terminal Setting Up the RF Rod Antenna Using the RF Rod Antenna and IR Signal TransmitterFind a place where you can attach the IR signal transmitter Setting Up the IR Signal TransmitterWhen using the remote control in the dark Putting Batteries in the Remote ControlConnecting the Power Cord Replace the coverRequired Connections for Zone Power amplifierMulti-Room Operations Connection Å Connection ıBasic Operating Procedure for Zone Zone 2 ON/OFF lamp lights up Turn Master Volume toPress Zone 2 ON/OFF so that Press Zone 2 Control so that ControlTo turn off the power into standby mode Turning the Power On and Off StandbyTo turn on the power, press Zone 1 Main Room OperationsSelecting the Zone 1 Source to Play Canceling the Zone 1 OperationsSpeaker and signal indicators on the display Press one of the source selecting buttonsAdjusting the Zone 1 Volume Selecting different sources for picture and soundMode Selecting the Analog or Digital Input ModeActivating the Zone 1 Front Speakers Analog Attenuating the Input SignalMuting the Zone 1 Sound Turning Analog Direct On and Off Changing the Display BrightnessMaking Sounds Natural Changing the Source NamePress Sleep repeatedly Using the Sleep TimerBasic adjustment auto memory Recording a SourcePress Zone 2 Control inside Last Zone Zone 2 volume Source appearsZone 2 Sub-room Operations Front door so that ZoneTo stop Zone 2 operations and sounds through Canceling the Zone 2 OperationsZone 2 Speakers terminal, see also w Setting the Zone To use this receiver for Zone 2 operationsDVD Adjusting the Zone 2 VolumeSelecting the Zone 2 Source to Play DownMuting the Zone 2 Sound Activating the Zone 2 Front SpeakersFront speakers To deactivate the Zone 2 front speakers, press Zone 2 againReceiving Radio Broadcasts Tuning in to Stations ManuallyEx. When you press FM/AM With Zone 1/ZONE Press FM/AMUsing Preset Tuning Selecting the FM Reception ModeBasic Settings Setup Menu ConfigurationButton To do Operation through On-Screen Display MenusMenu operation buttons Press SET Menu Operating ProcedurePress Setup Menu YES Setting the Speakers-SPEAKER SettingAdjusting the Speaker Channel Output Levels-CHANNEL Level 1SPKFront L Level AutoOFF Front R LevelFor each speaker Setting the Speaker DistanceSetting the Bass Sounds-SUBWOOFER LFEClose Setting the THX Audio-THX Audio SetupApart Setting the Digital Input/Output Terminals Setting the Surround Channel Output Speakers-SURR CH OUTSetting the Audio Delay Level-AUDIO Delay Selecting the Dual Mono Sound-DUAL MonoTurning On and Off the Video Output Setting the Video Input TerminalsSetting the Zone 2/Speakers 2 Usage PCMShowing the Text Information on the Display-FL Display Memorizing the Volume Level for Each Source-ONE Touch OPESuperimposing the Menus-SUPERIMPOSE TextAdjust Menu Sound AdjustmentsAdjustment Menu Configuration Midnight ModeOr an item on a submenu downwards or Display or erase the Adjustment MenuSelect a submenu on the Adjustment Menu Set other items on the same submenu if necessary Press Adjust MenuEx.When adjusting the DSP effects Same submenu Press # or @ Right or Left to setBass Adjustment procedureSubmenu items MIDWhen one of the DSP modes except ALL CH Stereo is activated Setting the Midnight Mode-MIDNIGHT ModeAdjusting the Various Effects Press Liveness repeatedly to adjust When Dolby Pro Logic II Music is activatedWhen Neo6 Music is activated Overall level of the effect 1 toIntroducing the Surround and THX Modes Using the Surround and THX ModesReproducing Theater Ambience DTS Digital Surround Dolby Digital EXDolby Pro Logic DTS Extended Surround DTS-ESES/EX/7.1 Available Surround and THX Modes Applicable to the Various SoftwareZone Incoming Signal Type 2-channel Available Surround Mode Available THX ModeActivating the 7.1-channel reproduction Activating the Surround and THX ModesAbout Dialog Normalization EXES7.1 onEx. When Dolby Digital is activated Press Surround to activate the Surround ModeTo cancel the Surround mode To adjust the speaker output level using the remote controlTo cancel the THX and Surround modes Press THX to activate the THX modeTo cancel the THX mode without canceling the Surround mode 3D Headphone ModeReproducing the Sound Field Using the DSP ModesHeadphone Mode Introducing the DSP ModesPress Effect repeatedly to adjust the level To adjust the DSP effectsTo cancel the DSP modes Activating the DSP ModesPlayback Modes Using the Analog Multi-channel Playback ModeActivating the Analog Multi-channel MD recorder Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver CD recorderWhen you turn off the Zone 2 source by pressing Automatic Power Off StandbyWhen you turn off the Zone 1 sound by pressing At the same timeDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemRX-DP20VBK Disc Search Only for CD PlayerTo exit from the Disc information screen Press Text Display while CD or MD is selected as the sourceDisc Information screen Zone 2 LearnPress % / fi to move to Performer Then press SET Press Text Display while CD is selected as the sourcePress % / fi to move to SEARCH, then press Press SET againPress % / fi to move to Title INPUT, then press SET Press % / fi to move to SEARCH, then press SETPress % / fi to move To GENRE, then Press SET Entering the Disc InformationPress Text Display while MD is selected as the source Enter the disc title, referring to steps 3Press % / fi to move to the genre you want, then press SET Press % / fi to move to Title Input Then press SET IR signal transmitter AV Compu Link Remote Control System Connections 1 IR Signal Transmitter Connection Connections 2 AV Compu Link ConnectionOne-Touch Video Play Connections 3 Video Cable ConnectionCase When you turn off the Zone 2 sound by pressing Automatic Power On/Off StandbyAutomatic Power On One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierTurntable CD playerCD player-changer CD recorder¶ REC Operating Video ComponentsVCR VCR connected to the VCR 1 jacks DVD playerChanging the Preset Signal Codes Operating Other Manufacturers’ EquipmentPress VCR Enter a manufacturer’s code usingPress and hold VCR Buttons 1-9,Release Audio Standby Press and hold Audio Standby Press DVDRelease Audio on Press and hold Audio ON. Standby on Press CDManufactures’ codes for VCR Manufactures’ codes for DBS tuner Manufacturer CodesManufactures’ codes for Catv converter Manufacturer Codes Manufacturer CodesSet the LEARN/TRANSMIT Storing the Remote Signals ManuallyTo store the signals Zone 1/ZONE 2 selector toControl For the Zone 1 operationsPress the desired button To use the stored signalsTo erase the stored signals Multi-room operations Zone1/Zone TroubleshootingProblem Possible Cause Solution Surround/THXFM/AM GeneralHz to 20 kHz with no more than 0.02% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionAM tuner VideoFM tuner IHF GeneralLimited Warranty Authorized Service Centers RX-DP20VBK AUDIO/VIDEO Control Receiver
Top Page Image Contents