Weider 831.159380 user manual Cable Assembly

Page 16

CABLE ASSEMBLY

34.Wrap the Military Press Cable (72) around a “V”-Pulley (50). Attach the “V”-Pulley to the Top Frame (55) with a 3/8” x 2 1/2” Bolt (86) and a 3/8” Nylon Locknut (21).

Wrap the Military Press Cable (72) around a 3 1/2” Pulley (15). Attach the Pulley to the indi- cated bracket on the Assist Arm (105) with a 3/8” x 1 3/4” Bolt (76) and a 3/8” Nylon Locknut (21). Be sure that the Cable is between the Pulley and the Assist Arm and that the Cable and Pulley move smoothly.

35.Wrap the Military Press Cable (72) around a “V”-Pulley (50). Attach the “V”-Pulley and a Long Cable Trap (31) to the Assist Upright

(74) with a 3/8” x 4 1/2” Bolt (112), a 3/8” Flat Washer (9), and a 3/8” Nylon Locknut (21). Be sure that the Long Cable Trap is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown.

Wrap the Military Press Cable (72) around a 3 1/2” Pulley (15). Attach the Pulley to the other bracket on the Assist Arm (105) with a 3/8” x 1 3/4” Bolt (76) and a 3/8” Nylon Locknut (21). Be sure that the Cable is between the Pulley and the Assist Arm and that the Cable and Pulley move smoothly.

34

55

50

21

86

72

76	21

15

Bracket

105

35

	74
	21
	31
	50
9	21

11

72

105

76

Bracket

15

16

Image 16

Contents Model No Serial No Patent PendingSEARS, Roebuck and CO., Hoffman ESTATES, IL Table of Contents Important PrecautionsBefore YOU Begin Using the Weider PRO 9645 Home Gym SystemFor your benefit, read this manual carefully before Assembly Frame AssemblyFollowing Tools not Included are Required for Assembly Frame AssemblyLocknuts yet Stabilizer 5. Stack eight Weights onto Stack of WeightsWeights 25 until is complete Tighten all Nylon Locknuts used in stepsTube is sitting in the pin grooves in the top Weight Be sure that the pin on the WeightWeight Be sure that the holes in the WeightLocate and open the parts bag labeled ARM Assembly Arm must be able to pivot freelyOn each Arm. Arm identification is very Important for stepDo not tighten the Nylon Locknut yet Arm with the Left Arm 47 refer to stepAssembly ARMARM Assembly Cable Assembly Long Cable Trap is positioned to hold the Cable in place Bracket Cable Cable Assembly Cable Assembly Must be inserted from the side shown That the Pulley is on the side shownThat the Cable Trap is positioned to hold Cable in placeCable Assembly Seat Assembly Locate and open the parts bag labeled Seat AssemblySeat Are not properly installed, they may be Rect the problem. Important If the cablesDamaged when heavy weight is used. See HOW to USE the Home GYM System Changing the Weight SettingAttaching and Removing the Seat Adjusting the LEG Press PlateAttaching the LEG Lever to the LOW Pulley Station Weight Resistance Chart PlatesTROUBLE-SHOOTING and Maintenance Tightening the CablesCable Diagrams High Cable 58 and Low CableHigh Cable Low CableMilitary Press Cable 72 and Leg Press Cable Pivot Arm Leg Press CablePage Page X 3 1/4 Bolt Key Part Qty Description R1096AKey Part Exploded DRAWING-Model No Model No Full 90 DAY WarrantySEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL