Weider 831.159380 user manual Cable Diagrams, High Cable 58 and Low Cable, Low Pulley

Page 26

CABLE DIAGRAMS

The cable diagrams on these pages show the proper routing of the High Cable (58), the Low Cable (23), the Military Press Cable (72), and the Leg Press Cable (99). Use the diagrams to be sure that the four cables and the cable traps have been assembled correctly. If the cables have not been correctly routed, the home gym sys- tem will not function properly and damage may occur. The insets show the proper positioning of the cable traps. The cable traps should be positioned so that the cables will not come off the pulleys. Be sure that the cable traps do not touch or bind the cables.

High Cable (58) and Low Cable (23)

7

5

2	3	1—High Pulley
		1—High Pulley

4

6

High Cable (58)

5—Long “U”-Bracket

Low Cable (23)

Front Weight Stack—8

4

3

2												1—Low Pulley
2												1—Low Pulley

26

Image 26

Contents SEARS, Roebuck and CO., Hoffman ESTATES, IL Patent PendingModel No Serial No Table of Contents Important PrecautionsFor your benefit, read this manual carefully before Using the Weider PRO 9645 Home Gym SystemBefore YOU Begin Following Tools not Included are Required for Assembly AssemblyFrame Assembly Frame AssemblyLocknuts yet Weights 25 until is complete Stabilizer 5. Stack eight Weights ontoStack of Weights Tighten all Nylon Locknuts used in stepsWeight Tube is sitting in the pin grooves in the top WeightBe sure that the pin on the Weight Be sure that the holes in the WeightLocate and open the parts bag labeled ARM Assembly Arm must be able to pivot freelyDo not tighten the Nylon Locknut yet On each Arm. Arm identification is veryImportant for step Arm with the Left Arm 47 refer to stepAssembly ARMARM Assembly Cable Assembly Long Cable Trap is positioned to hold the Cable in place Bracket Cable Cable Assembly Cable Assembly That the Cable Trap is positioned to hold Must be inserted from the side shownThat the Pulley is on the side shown Cable in placeCable Assembly Seat Assembly Locate and open the parts bag labeled Seat AssemblySeat Damaged when heavy weight is used. See Rect the problem. Important If the cablesAre not properly installed, they may be HOW to USE the Home GYM System Changing the Weight SettingAttaching the LEG Lever to the LOW Pulley Station Adjusting the LEG Press PlateAttaching and Removing the Seat Weight Resistance Chart PlatesTROUBLE-SHOOTING and Maintenance Tightening the CablesHigh Cable Cable DiagramsHigh Cable 58 and Low Cable Low CableMilitary Press Cable 72 and Leg Press Cable Pivot Arm Leg Press CablePage Page X 3 1/4 Bolt Key Part R1096AKey Part Qty Description Exploded DRAWING-Model No SEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL Full 90 DAY WarrantyModel No