Weider WESY85201 user manual Clipe do Cabo

Page 23

Contraporca de Nylon de 1/4”

(3)–20

Contrapino de 3/8” (21)–15

Porca de Nylon de 3/8” (33)–1

Contraporca de Nylon de 1/4”

(2)–3




Pino de 3/8” x 2 (12)–3				Clipe do Cabo (53)–3

Pino de 3/8” x 2 1/2” (7)–5

Pino de 3/8” x 3 1/4”		Retentor de 1” (69)–4
(35)–1		Retentor de 1” (69)–4
(35)–1

Pino de 3/8” x 3 1/2” (16)–3

Pino de 3/8” x 3 3/4” (71)–3

Image 23

Contents Mon.-Fri., 6 a.m.-6 p.m. MST QUESTIONS?Model No. WESY85201 Serial No Customer HOT LineLimited Warranty Table of ContentsMake sure that the cables remain on the pul Important PrecautionsIng down Before YOU Begin Using the WeiderNot tighten the Nylon Locknuts yet AssemblyAssembly, use the Part Identification Following Tools not Included are Required for AssemblyTighten all Nylon Locknuts used in steps 1 through Frame AssemblyEach Carriage Bolt Shown Frame Assembly ARM AssemblyAttach the Left Arm 47 in the same manner On each Arm. Arm identification is very important for stepAttach a V-Pulley 6 and a Long Cable Trap Tighten all Nylon Locknuts used in this step now Nylon Locknuts until the end of this assembly stepCable in place Cable AssemblyLocate the Long Cable A 3/8 Nylon LocknutFor easy part identification Pulley 6 on the Right Arm Be sure3/8 x 2 1/2 Bolt 7 and the 3/8 Nylon Locknut not shown Bracket. Note This may come pre-assem- bledTrap 66 is turned to hold the Cable Locate the Short Cable Route3/8 x 3 1/2 Bolt 16 Front UprightTighten the 3/8 Nylon Locknut 21 and the 3/8 x 3 1/2 Bolt Seat Plate to the Seat 13 with two 1/4 x 1/2 Screws Cable Assembly Seat AssemblyA 1/4 Flat Washer 10. Do not com 8520 Seat Assembly Decal PlacementInsert the L-Pin 40 through the holes Attaching the LAT BAR or Nylon Strap to High Pulley Station AdjustmentChanging the Weight Setting Amount of resistance at each weight stationLocking the LEG Lever Weight Resistance ChartThat the Cable and Pulley move smoothly TROUBLE-SHOOTING and MaintenanceTightening the Cables Woven cable, the type of cable used on the homeBe sure that Cable DiagramCable traps do not touch or bind the cables Long Cable Short CablePart No R1096A Ordering Replacement PartsWESY85201 R1096A Remove this Part Identification Chart from the ManualParafusode5/16x13/4 Clipe do Cabo Espaçador de 1/2 x 3/4 61-2 Remove this Part LIST/EXPLODED Drawing from the Manual Qty Description Part LIST-Model No. WESY85201R1096A

Clipe do Cabo (53)–3