Weider WESY85201 user manual Before YOU Begin, Using the Weider

Page 4

BEFORE YOU BEGIN

Thank you for selecting the versatile WEIDER			® 8520	Service Department toll-free at 1-800-999-3756,
Home Gym System. The WEIDER		® 8520 offers a		Monday through Friday, 6 a.m. until 6 p.m. Mountain
selection of weight stations designed to develop every				Time (excluding holidays). To help us assist you,
major muscle group of the body. Whether your goal is				please note the product model number and serial
to tone your body, build dramatic muscle size and				number before calling. The model number is
strength, or improve your cardiovascular system, the				WESY85201. The serial number can be found on a
WEIDER	® 8510 will help you to achieve the specific			decal attached to the WEIDER	® 8520 (see the front
results you want.				cover of this manual).
For your benefit, read this manual carefully before				Before reading further, please review the drawing
using the WEIDER		® 8520 Home Gym System.	If you	below and familiarize yourself with the parts that are
have additional questions, please call our Customer				labeled.

	ASSEMBLED
	DIMENSIONS:		High Pulley Station
	Height:	76 in.	High Pulley Station
	Height:	76 in.
	Width:	38 in.
	Length:	59 in.
			Lat Bar
	Butterfly Arms
	Backrest
			Press Arm
	Leg Press Plate
			Seat
	Leg Lever		Weight Stack
	Leg Lever
			Weight Pin
	Low Pulley Station
	Foot Plate
			4

Image 4

Contents QUESTIONS? Model No. WESY85201 Serial NoCustomer HOT Line Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Limited WarrantyIng down Important PrecautionsMake sure that the cables remain on the pul Using the Weider Before YOU BeginAssembly Assembly, use the Part IdentificationFollowing Tools not Included are Required for Assembly Not tighten the Nylon Locknuts yetEach Carriage Bolt Frame AssemblyTighten all Nylon Locknuts used in steps 1 through Frame Assembly ARM Assembly ShownAttach a V-Pulley 6 and a Long Cable Trap On each Arm. Arm identification is very important for stepAttach the Left Arm 47 in the same manner Nylon Locknuts until the end of this assembly step Tighten all Nylon Locknuts used in this step nowCable Assembly Locate the Long CableA 3/8 Nylon Locknut Cable in placePulley 6 on the Right Arm Be sure 3/8 x 2 1/2 Bolt 7 and the 3/8 Nylon Locknut not shownBracket. Note This may come pre-assem- bled For easy part identificationLocate the Short Cable Route 3/8 x 3 1/2 Bolt 16Front Upright Trap 66 is turned to hold the CableTighten the 3/8 Nylon Locknut 21 and the 3/8 x 3 1/2 Bolt A 1/4 Flat Washer 10. Do not com Cable Assembly Seat AssemblySeat Plate to the Seat 13 with two 1/4 x 1/2 Screws Insert the L-Pin 40 through the holes Seat Assembly Decal Placement8520 Adjustment Changing the Weight SettingAmount of resistance at each weight station Attaching the LAT BAR or Nylon Strap to High Pulley StationWeight Resistance Chart Locking the LEG LeverTROUBLE-SHOOTING and Maintenance Tightening the CablesWoven cable, the type of cable used on the home That the Cable and Pulley move smoothlyCable Diagram Cable traps do not touch or bind the cables Long CableShort Cable Be sure thatOrdering Replacement Parts Part No R1096ARemove this Part Identification Chart from the Manual WESY85201 R1096AParafusode5/16x13/4 Clipe do Cabo Espaçador de 1/2 x 3/4 61-2 Remove this Part LIST/EXPLODED Drawing from the Manual Part LIST-Model No. WESY85201 Qty DescriptionR1096A