Weider WESY85201 user manual Ordering Replacement Parts, Part No R1096A

Page 20

ORDERING REPLACEMENT PARTS

To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information:

1. The MODEL NUMBER of the product (WESY85201).

2. The NAME of the product (WEIDER

® 8520 Home Gym System).

3.The SERIAL NUMBER of the product (see the front cover of this manual).

4.The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING at the center of this manual).

Part No. 134908 R1096A

Image 20

Contents QUESTIONS? Model No. WESY85201 Serial NoCustomer HOT Line Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Limited WarrantyMake sure that the cables remain on the pul Important PrecautionsIng down Using the Weider Before YOU BeginAssembly Assembly, use the Part IdentificationFollowing Tools not Included are Required for Assembly Not tighten the Nylon Locknuts yetTighten all Nylon Locknuts used in steps 1 through Frame AssemblyEach Carriage Bolt Frame Assembly ARM Assembly ShownAttach the Left Arm 47 in the same manner On each Arm. Arm identification is very important for stepAttach a V-Pulley 6 and a Long Cable Trap Nylon Locknuts until the end of this assembly step Tighten all Nylon Locknuts used in this step nowCable Assembly Locate the Long CableA 3/8 Nylon Locknut Cable in placePulley 6 on the Right Arm Be sure 3/8 x 2 1/2 Bolt 7 and the 3/8 Nylon Locknut not shownBracket. Note This may come pre-assem- bled For easy part identificationLocate the Short Cable Route 3/8 x 3 1/2 Bolt 16Front Upright Trap 66 is turned to hold the CableTighten the 3/8 Nylon Locknut 21 and the 3/8 x 3 1/2 Bolt Seat Plate to the Seat 13 with two 1/4 x 1/2 Screws Cable Assembly Seat AssemblyA 1/4 Flat Washer 10. Do not com 8520 Seat Assembly Decal PlacementInsert the L-Pin 40 through the holes Adjustment Changing the Weight SettingAmount of resistance at each weight station Attaching the LAT BAR or Nylon Strap to High Pulley StationWeight Resistance Chart Locking the LEG LeverTROUBLE-SHOOTING and Maintenance Tightening the CablesWoven cable, the type of cable used on the home That the Cable and Pulley move smoothlyCable Diagram Cable traps do not touch or bind the cables Long CableShort Cable Be sure thatOrdering Replacement Parts Part No R1096ARemove this Part Identification Chart from the Manual WESY85201 R1096AParafusode5/16x13/4 Clipe do Cabo Espaçador de 1/2 x 3/4 61-2 Remove this Part LIST/EXPLODED Drawing from the Manual Part LIST-Model No. WESY85201 Qty DescriptionR1096A