5. Flip door over |
| 8. Rotate outer door |
|
|
|
|
|
|
|
|
|
Flip door over so handle side is down.
6. Remove screws from door
Remove screws at top, bottom, and side of door (4 screws). Keep door screws separate from hinge screws as they are different sizes.
7. Separate inner from outer door
Holding door over towel on dryer, pry inner door and lift to separate it from outer door.
NOTE: Do not pull on door seal or plastic door catches.
Take outer door and rotate it 180º and set it back down on inner door. Be certain to keep cardboard spacer centered between doors. Reattach outer door panel to inner door panel so handle is on the side where hinges were just removed. Insert 4 door screws.
9. Attach door hinges
Reattach door hinges to dryer door so that the larger hole is at the bottom of the hinge.
21