Miele wt945 Control panel, Start button, Door button Opens the drum door On / 0-OFF button

Page 10

Description of the appliance

Control panel

a Delay start button and display This is used to delay the start of a programme.

The delay time will appear in the display.

b "START" button

Press the Start button to start a programme.

The Start indicator lamp will flash as soon as a programme can be started.

c Door button Opens the drum door.

d I-ON / 0-OFF button

to switch the machine on and off and to interrupt a programme that is currently running.

e WASHING programme selector for selecting a basic wash programme and temperature. The programme selector can be turned clockwise or anti-clockwise.

f "Spin" button

for changing a spin speed or selecting

–Rinse hold or

–Without final spin.

g Additional option buttons

for selecting additional functions. When an additional option is selected the relevant indicator lamp will come on.

h DRYING programme selector for selecting the drying programme and the drying level required. The programme selector can be turned clockwise or anti-clockwise.

i Programme sequence Programme sequence indicator lamps show which section of the programme has been reached and fault / check indicator lamps.

10

Image 10

Contents Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Disposal of the packing material Caring for the environmentDisposal of your old appliance or machine Technical safety Correct usageUse Using accessories Disposal of your old machineFeatures Description of the applianceDoor button Opens the drum door On / 0-OFF button Control panelStart button Additional option buttonsSpin button with indicator lamps Important control panel featuresProgramme selector Washing and drying environmentally Flushing out the drum Before using for the first timeWater hardness reminder Cottons e Programme overviewMinimum Iron e f Woollens g Delicates fQuick wash Separate rinse StarchDrain / Spin Flushing out the drumHow to wash correctly Tumble dry How to wash correctlyImportant other care symbols IroningBefore washing Separate washingSort the laundry Select a programme Pre-wash Detergent dispensing when selecting the soak optionSoak Water plusAdding detergent At the end of a programme Adding and removing laundry Door cannot be opened, ifProgramme cycle CottonsSpecial features in the programme sequences Quick WashWater softener Adding detergentDetergent Washing with several componentsAdding fabric conditioner or liquid starch separately Fabric conditioners / starch formulationsFabric conditioners, texturisers and starch Separate starchingTips on drying Following fabrics should not be tumble driedProgramme overview Timed Drying 20 min / 30 min / 40 min / 60 min Always select the Drying / Low temp. optionBefore drying Separate dryingPreparing the laundry Select a drying programme Programme selectionDrying / Low temp After drying Close the drum door Open the stopcock Add detergent Washing and drying in a continuous sequenceSelect the programme After each washing or drying programme Rinse out fluff programme Changing a programme sequence To cancel a programmeTo cancel an incorrectly selected programme To change a programme which has been lockedSafety lock Safety lockEngaging the safety lock Cleaning the detergent dispenser Cleaning and careCleaning the machine ClothClean the porthole glass Clean the siphon tubeCleaning the filter in the water inlet Problem solving guide What to do if ... ?Programme does not start DeptWash programme stops and a fault indicator light comes on During a programme Indicator lamp flashesLocked indicator lamp But the washGeneral problems or an unsatisfactory wash or drying result Opened during or after OptionDrying When drying separately Problem Possible cause Remedy Laundry is stillWhen washing Damp after a dryingMachine is not Problem Possible cause Remedy Laundry is notSpun satisfactorily Steady during a spinWhite residues which Problem Possible cause Remedy There is an excessiveBuild-up of foam Look like powderResult Problem Possible cause Remedy Liquid detergent doesNot give the required Remember to removeBlocked drain outlet Opening the drum door After sales service Appliance guaranteeInstallation and connection Front viewInstallation Installation surfacePlease note the following Removing the transit fitting Screwing out and adjusting the feet Levelling the machineInstallation and connection Inlet hose Electronic unit and washing machine housingMiele Waterproof system Drain hoseConnection to the water supply Installation and connection Maintenance and care Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data ProgrammesTechnical data Programmable functions for changing standard settings Programmable functions High water levelAdditional rinse for Cottons programme Buzzer Opening the door at high temperatures Shortening the drying time Factory settingFinal residual moisture after drying Lengthening the drying timePage Alteration rights reserved / 3404 / WT 945 S