Miele WT 945 S WPS, wt945 Important control panel features, Programme selector

Page 11

Description of the appliance

Important control panel features

Programme selector

The programme selector is used to set the

–basic wash programmes and temperatures

and

–the drying programmes and temperatures.

Additional option buttons

Additional options can be added to the basic programme. Pressing the relevant button selects or de-selects the particular option. An additional option is selected if its indicator lamp is on.

If the lamp does not come on, the function is not compatible with the programme you are trying to use it with. The indicator lamp will go out when the option button is released.

"Spin" button with indicator lamps

To change the spin speed press the "Spin" button.

It is not possible to select a spin speed higher than the permitted maximum spin for the basic wash programme. The indicator lamps show the setting selected.

Spinning at 400 - 1500 rpm

The spin can be set within this range for the

–final spin during a wash programme or

–for "Thermospin" during drying (see "DRYING - Programme selection" for information on the "Thermospin").

The final spin in a wash programme can also be deactivated:

^Press the "Spin" button until you reach

"Rinse hold"

The laundry is not spun and remains suspended in the final rinse water. This reduces creasing if the laundry is not going to be removed from the drum im- mediately after the end of the programme.

To continue the programme:

–with a final spin

press the "Spin" button until you reach the spin speed you want.

–without a final spin

Press the "Spin" button repeatedly until the Without final spin indicator lamp lights up.

Without final spin

The laundry is not spun after the final rinse but the water is drained away and the machine goes straight into the anti-crease stage.

11

Image 11

Contents Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Disposal of your old appliance or machine Caring for the environmentDisposal of the packing material Correct usage Technical safetyUse Disposal of your old machine Using accessoriesDescription of the appliance FeaturesAdditional option buttons Control panelStart button Door button Opens the drum door On / 0-OFF buttonProgramme selector Important control panel featuresSpin button with indicator lamps Washing and drying environmentally Water hardness reminder Before using for the first timeFlushing out the drum Minimum Iron e f Programme overviewCottons e Quick wash Delicates fWoollens g Flushing out the drum StarchDrain / Spin Separate rinseHow to wash correctly Ironing How to wash correctlyImportant other care symbols Tumble drySort the laundry Separate washingBefore washing Select a programme Water plus Detergent dispensing when selecting the soak optionSoak Pre-washAdding detergent At the end of a programme Door cannot be opened, if Adding and removing laundryCottons Programme cycleQuick Wash Special features in the programme sequencesWashing with several components Adding detergentDetergent Water softenerSeparate starching Fabric conditioners / starch formulationsFabric conditioners, texturisers and starch Adding fabric conditioner or liquid starch separatelyFollowing fabrics should not be tumble dried Tips on dryingProgramme overview Always select the Drying / Low temp. option Timed Drying 20 min / 30 min / 40 min / 60 minPreparing the laundry Separate dryingBefore drying Drying / Low temp Programme selectionSelect a drying programme After drying Select the programme Washing and drying in a continuous sequenceClose the drum door Open the stopcock Add detergent After each washing or drying programme Rinse out fluff programme To change a programme which has been locked To cancel a programmeTo cancel an incorrectly selected programme Changing a programme sequenceEngaging the safety lock Safety lockSafety lock Cloth Cleaning and careCleaning the machine Cleaning the detergent dispenserClean the siphon tube Clean the porthole glassCleaning the filter in the water inlet What to do if ... ? Problem solving guideDept Programme does not startWash programme stops and a fault indicator light comes on But the wash Indicator lamp flashesLocked indicator lamp During a programmeGeneral problems or an unsatisfactory wash or drying result Drying OptionOpened during or after Damp after a drying Problem Possible cause Remedy Laundry is stillWhen washing When drying separatelySteady during a spin Problem Possible cause Remedy Laundry is notSpun satisfactorily Machine is notLook like powder Problem Possible cause Remedy There is an excessiveBuild-up of foam White residues whichRemember to remove Problem Possible cause Remedy Liquid detergent doesNot give the required ResultBlocked drain outlet Opening the drum door Appliance guarantee After sales serviceFront view Installation and connectionPlease note the following Installation surfaceInstallation Removing the transit fitting Levelling the machine Screwing out and adjusting the feetInstallation and connection Drain hose Electronic unit and washing machine housingMiele Waterproof system Inlet hoseConnection to the water supply Installation and connection Maintenance and care Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSProgrammes Consumption dataTechnical data Programmable functions for changing standard settings High water level Programmable functionsAdditional rinse for Cottons programme Buzzer Opening the door at high temperatures Lengthening the drying time Factory settingFinal residual moisture after drying Shortening the drying timePage Alteration rights reserved / 3404 / WT 945 S