Miele wt945, WT 945 S WPS operating instructions Programme does not start, Dept

Page 44

Problem solving guide

The programme does not start.

Problem

Possible cause

Remedy

The On indicator lamp

There is no power to

Check whether

does not light up in the

the machine.

– the door is properly closed.

programme sequence

 

– the mains plug is plugged

display or the START

 

 

in.

button indicator lamp

 

 

– the mains fuse has blown.

does not flash.

 

 

 

If one of the following

There is a fault.

Start the programme again.

indicator lamps is

 

If the indicator light flashes

flashing

 

again, call the Miele Service

- Soak/Pre-wash

 

Dept.

- Washing

 

 

- Rinses

 

 

The "Locked" indicator

The safety lock is

De-activate the safety lock as

lamp is on.

activated.

described in the section

 

 

"Safety lock".

44

Image 44
Contents Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Disposal of your old appliance or machine Caring for the environmentDisposal of the packing material Technical safety Correct usageUse Using accessories Disposal of your old machineFeatures Description of the applianceControl panel Start buttonDoor button Opens the drum door On / 0-OFF button Additional option buttonsProgramme selector Important control panel featuresSpin button with indicator lamps Washing and drying environmentally Water hardness reminder Before using for the first timeFlushing out the drum Minimum Iron e f Programme overviewCottons e Quick wash Delicates fWoollens g Starch Drain / SpinSeparate rinse Flushing out the drumHow to wash correctly How to wash correctly Important other care symbolsTumble dry IroningSort the laundry Separate washingBefore washing Select a programme Detergent dispensing when selecting the soak option SoakPre-wash Water plusAdding detergent At the end of a programme Adding and removing laundry Door cannot be opened, ifProgramme cycle CottonsSpecial features in the programme sequences Quick WashAdding detergent DetergentWater softener Washing with several componentsFabric conditioners / starch formulations Fabric conditioners, texturisers and starchAdding fabric conditioner or liquid starch separately Separate starchingTips on drying Following fabrics should not be tumble driedProgramme overview Timed Drying 20 min / 30 min / 40 min / 60 min Always select the Drying / Low temp. optionPreparing the laundry Separate dryingBefore drying Drying / Low temp Programme selectionSelect a drying programme After drying Select the programme Washing and drying in a continuous sequenceClose the drum door Open the stopcock Add detergent After each washing or drying programme Rinse out fluff programme To cancel a programme To cancel an incorrectly selected programmeChanging a programme sequence To change a programme which has been lockedEngaging the safety lock Safety lockSafety lock Cleaning and care Cleaning the machineCleaning the detergent dispenser ClothClean the porthole glass Clean the siphon tubeCleaning the filter in the water inlet Problem solving guide What to do if ... ?Programme does not start DeptWash programme stops and a fault indicator light comes on Indicator lamp flashes Locked indicator lampDuring a programme But the washGeneral problems or an unsatisfactory wash or drying result Drying OptionOpened during or after Problem Possible cause Remedy Laundry is still When washingWhen drying separately Damp after a dryingProblem Possible cause Remedy Laundry is not Spun satisfactorilyMachine is not Steady during a spinProblem Possible cause Remedy There is an excessive Build-up of foamWhite residues which Look like powderProblem Possible cause Remedy Liquid detergent does Not give the requiredResult Remember to removeBlocked drain outlet Opening the drum door After sales service Appliance guaranteeInstallation and connection Front viewPlease note the following Installation surfaceInstallation Removing the transit fitting Screwing out and adjusting the feet Levelling the machineInstallation and connection Electronic unit and washing machine housing Miele Waterproof systemInlet hose Drain hoseConnection to the water supply Installation and connection Maintenance and care Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data ProgrammesTechnical data Programmable functions for changing standard settings Programmable functions High water levelAdditional rinse for Cottons programme Buzzer Opening the door at high temperatures Factory setting Final residual moisture after dryingShortening the drying time Lengthening the drying timePage Alteration rights reserved / 3404 / WT 945 S