Miele wt945, WT 945 S WPS operating instructions Using accessories, Disposal of your old machine

Page 8

Warning and Safety instructions

For machines with a 'porthole' door, remember that the porthole

glass will be hot when washing at very high temperatures.

Do not let children touch it during a hot wash programme.

If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however,

you do wish to descale the machine only use proprietary non-corrosive descaling agents and strictly observe the instructions on the packaging. If in doubt contact the Miele Customer Ser- vice Dept. or your Miele Dealer.

Never use solvent based cleaning agents in this machine, as this may

result in damage to component parts and create toxic fumes. Such detergents also pose a fire and explosion hazard.

Textiles which have been pre-treated in solvent based

cleaning agents must be thoroughly rinsed in clean water before being washed in the machine.

Only use dyes specified by the manufacturer as being suitable for

use in a domestic washing machine. Always observe the manufacturer's instructions carefully.

Colour run and dye removers contain sulphur compounds which

can cause damage such as corrosion. Do not use these products in this machine.

Always make sure the drum is stationary before reaching in to

remove laundry. Reaching into a moving drum is extremely dangerous.

There is a danger of fire during drying with fabrics which:

contain rubber, foam rubber or rubber like materials

have been treated with inflammable cleaning agents

have been splashed with hair lacquer, hair spray, nail varnish remover or similar substances

which contain padding or fillings (e.g. pillows, jackets). If these were damaged, the filling could get out with the risk of igniting in the dryer.

Make sure that any dispensing balls etc. are removed from laundry

before the drying programme. These dispensers can melt during the drying programme and cause damage to the machine and the laundry. Do not use liquid dispenser balls or similar if you are planning to wash and then dry in one continuous sequence.

Using accessories

Accessory parts may only be fitted when expressly approved by Miele.

If other parts are used, guarantee, performance and product liability claims will be invalidated.

Disposal of your old machine

Disconnect and remove the mains plug from the socket. Render the plug useless. Cut off the cable directly behind the appliance to prevent misuse.

8

Image 8
Contents Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Disposal of your old appliance or machine Caring for the environmentDisposal of the packing material Technical safety Correct usageUse Using accessories Disposal of your old machineFeatures Description of the applianceControl panel Start buttonDoor button Opens the drum door On / 0-OFF button Additional option buttonsProgramme selector Important control panel featuresSpin button with indicator lamps Washing and drying environmentally Water hardness reminder Before using for the first timeFlushing out the drum Minimum Iron e f Programme overviewCottons e Quick wash Delicates fWoollens g Starch Drain / SpinSeparate rinse Flushing out the drumHow to wash correctly How to wash correctly Important other care symbolsTumble dry IroningSort the laundry Separate washingBefore washing Select a programme Detergent dispensing when selecting the soak option SoakPre-wash Water plusAdding detergent At the end of a programme Adding and removing laundry Door cannot be opened, ifProgramme cycle CottonsSpecial features in the programme sequences Quick WashAdding detergent DetergentWater softener Washing with several componentsFabric conditioners / starch formulations Fabric conditioners, texturisers and starchAdding fabric conditioner or liquid starch separately Separate starchingTips on drying Following fabrics should not be tumble driedProgramme overview Timed Drying 20 min / 30 min / 40 min / 60 min Always select the Drying / Low temp. optionPreparing the laundry Separate dryingBefore drying Drying / Low temp Programme selectionSelect a drying programme After drying Select the programme Washing and drying in a continuous sequenceClose the drum door Open the stopcock Add detergent After each washing or drying programme Rinse out fluff programme To cancel a programme To cancel an incorrectly selected programmeChanging a programme sequence To change a programme which has been lockedEngaging the safety lock Safety lockSafety lock Cleaning and care Cleaning the machineCleaning the detergent dispenser ClothClean the porthole glass Clean the siphon tubeCleaning the filter in the water inlet Problem solving guide What to do if ... ?Programme does not start DeptWash programme stops and a fault indicator light comes on Indicator lamp flashes Locked indicator lampDuring a programme But the washGeneral problems or an unsatisfactory wash or drying result Drying OptionOpened during or after Problem Possible cause Remedy Laundry is still When washingWhen drying separately Damp after a dryingProblem Possible cause Remedy Laundry is not Spun satisfactorilyMachine is not Steady during a spinProblem Possible cause Remedy There is an excessive Build-up of foamWhite residues which Look like powderProblem Possible cause Remedy Liquid detergent does Not give the requiredResult Remember to removeBlocked drain outlet Opening the drum door After sales service Appliance guaranteeInstallation and connection Front viewPlease note the following Installation surfaceInstallation Removing the transit fitting Screwing out and adjusting the feet Levelling the machineInstallation and connection Electronic unit and washing machine housing Miele Waterproof systemInlet hose Drain hoseConnection to the water supply Installation and connection Maintenance and care Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data ProgrammesTechnical data Programmable functions for changing standard settings Programmable functions High water levelAdditional rinse for Cottons programme Buzzer Opening the door at high temperatures Factory setting Final residual moisture after dryingShortening the drying time Lengthening the drying timePage Alteration rights reserved / 3404 / WT 945 S