Miele wt945, WT 945 S WPS operating instructions Electrical connection U.K, Non-rewireable plugs BS

Page 66

Installation and connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with national and local safety regulations.

Ensure power is not supplied to the appliance until after installation work has been carried out.

The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply. The voltage and connected load are given on the data plate. Please ensure these match the household mains supply. The fuse rating is quoted on the plug.

Connection should be made via a suitable switched socket which is easily accessible after installation.

For extra safety it is advisable to install a residual current device (RCD), with a trip current of 30 mA (in accordance with DIN VDE 0664, VDE 0100 Section 739).

Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING: THIS APPLIANCE MUST BE EARTHED

66

Image 66

Contents Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Caring for the environment Disposal of the packing materialDisposal of your old appliance or machine Technical safety Correct usageUse Using accessories Disposal of your old machineFeatures Description of the applianceDoor button Opens the drum door On / 0-OFF button Control panelStart button Additional option buttonsImportant control panel features Spin button with indicator lampsProgramme selector Washing and drying environmentally Before using for the first time Flushing out the drumWater hardness reminder Programme overview Cottons eMinimum Iron e f Delicates f Woollens gQuick wash Separate rinse StarchDrain / Spin Flushing out the drumHow to wash correctly Tumble dry How to wash correctlyImportant other care symbols IroningSeparate washing Before washingSort the laundry Select a programme Pre-wash Detergent dispensing when selecting the soak optionSoak Water plusAdding detergent At the end of a programme Adding and removing laundry Door cannot be opened, ifProgramme cycle CottonsSpecial features in the programme sequences Quick WashWater softener Adding detergentDetergent Washing with several componentsAdding fabric conditioner or liquid starch separately Fabric conditioners / starch formulationsFabric conditioners, texturisers and starch Separate starchingTips on drying Following fabrics should not be tumble driedProgramme overview Timed Drying 20 min / 30 min / 40 min / 60 min Always select the Drying / Low temp. optionSeparate drying Before dryingPreparing the laundry Programme selection Select a drying programmeDrying / Low temp After drying Washing and drying in a continuous sequence Close the drum door Open the stopcock Add detergentSelect the programme After each washing or drying programme Rinse out fluff programme Changing a programme sequence To cancel a programmeTo cancel an incorrectly selected programme To change a programme which has been lockedSafety lock Safety lockEngaging the safety lock Cleaning the detergent dispenser Cleaning and careCleaning the machine ClothClean the porthole glass Clean the siphon tubeCleaning the filter in the water inlet Problem solving guide What to do if ... ?Programme does not start DeptWash programme stops and a fault indicator light comes on During a programme Indicator lamp flashesLocked indicator lamp But the washGeneral problems or an unsatisfactory wash or drying result Option Opened during or afterDrying When drying separately Problem Possible cause Remedy Laundry is stillWhen washing Damp after a dryingMachine is not Problem Possible cause Remedy Laundry is notSpun satisfactorily Steady during a spinWhite residues which Problem Possible cause Remedy There is an excessiveBuild-up of foam Look like powderResult Problem Possible cause Remedy Liquid detergent doesNot give the required Remember to removeBlocked drain outlet Opening the drum door After sales service Appliance guaranteeInstallation and connection Front viewInstallation surface InstallationPlease note the following Removing the transit fitting Screwing out and adjusting the feet Levelling the machineInstallation and connection Inlet hose Electronic unit and washing machine housingMiele Waterproof system Drain hoseConnection to the water supply Installation and connection Maintenance and care Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data ProgrammesTechnical data Programmable functions for changing standard settings Programmable functions High water levelAdditional rinse for Cottons programme Buzzer Opening the door at high temperatures Shortening the drying time Factory settingFinal residual moisture after drying Lengthening the drying timePage Alteration rights reserved / 3404 / WT 945 S