Miele wt945, WT 945 S WPS Adding and removing laundry, Door cannot be opened, if

Page 24

How to wash correctly

Adding and removing laundry

Laundry can be added or removed after the start of one of the following programmes:

–COTTONS

–MINIMUM IRON

–QUICK WASH 40°C

^Press the Door button in and hold it until the door springs open.

^Add or remove items.

^Close the door.

The programme will continue automatically.

The door cannot be opened, if:

–the suds temperature is above 70°C (except when the programmable function "Opening the door at high temperatures" has been activated.

Warning: The water in the machine will be very hot and could cause burning or scalding.

–the additional function Water plus has been selected (because the water level will be too high).

–the safety lock has been activated.

–the programme has reached the Final spin stage.

The locked indicator lamp will come on if the Door button is pressed when the above conditions are present.

24

Image 24

Contents Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Caring for the environment Disposal of the packing materialDisposal of your old appliance or machine Technical safety Correct usageUse Using accessories Disposal of your old machineFeatures Description of the applianceControl panel Start buttonDoor button Opens the drum door On / 0-OFF button Additional option buttonsImportant control panel features Spin button with indicator lampsProgramme selector Washing and drying environmentally Before using for the first time Flushing out the drumWater hardness reminder Programme overview Cottons eMinimum Iron e f Delicates f Woollens gQuick wash Starch Drain / SpinSeparate rinse Flushing out the drumHow to wash correctly How to wash correctly Important other care symbolsTumble dry IroningSeparate washing Before washingSort the laundry Select a programme Detergent dispensing when selecting the soak option SoakPre-wash Water plusAdding detergent At the end of a programme Adding and removing laundry Door cannot be opened, ifProgramme cycle CottonsSpecial features in the programme sequences Quick WashAdding detergent DetergentWater softener Washing with several componentsFabric conditioners / starch formulations Fabric conditioners, texturisers and starchAdding fabric conditioner or liquid starch separately Separate starchingTips on drying Following fabrics should not be tumble driedProgramme overview Timed Drying 20 min / 30 min / 40 min / 60 min Always select the Drying / Low temp. optionSeparate drying Before dryingPreparing the laundry Programme selection Select a drying programmeDrying / Low temp After drying Washing and drying in a continuous sequence Close the drum door Open the stopcock Add detergentSelect the programme After each washing or drying programme Rinse out fluff programme To cancel a programme To cancel an incorrectly selected programmeChanging a programme sequence To change a programme which has been lockedSafety lock Safety lockEngaging the safety lock Cleaning and care Cleaning the machineCleaning the detergent dispenser ClothClean the porthole glass Clean the siphon tubeCleaning the filter in the water inlet Problem solving guide What to do if ... ?Programme does not start DeptWash programme stops and a fault indicator light comes on Indicator lamp flashes Locked indicator lampDuring a programme But the washGeneral problems or an unsatisfactory wash or drying result Option Opened during or afterDrying Problem Possible cause Remedy Laundry is still When washingWhen drying separately Damp after a dryingProblem Possible cause Remedy Laundry is not Spun satisfactorilyMachine is not Steady during a spinProblem Possible cause Remedy There is an excessive Build-up of foamWhite residues which Look like powderProblem Possible cause Remedy Liquid detergent does Not give the requiredResult Remember to removeBlocked drain outlet Opening the drum door After sales service Appliance guaranteeInstallation and connection Front viewInstallation surface InstallationPlease note the following Removing the transit fitting Screwing out and adjusting the feet Levelling the machineInstallation and connection Electronic unit and washing machine housing Miele Waterproof systemInlet hose Drain hoseConnection to the water supply Installation and connection Maintenance and care Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data ProgrammesTechnical data Programmable functions for changing standard settings Programmable functions High water levelAdditional rinse for Cottons programme Buzzer Opening the door at high temperatures Factory setting Final residual moisture after dryingShortening the drying time Lengthening the drying timePage Alteration rights reserved / 3404 / WT 945 S